PIP250M,518 NXP Semiconductors, PIP250M,518 Datasheet - Page 7

no-image

PIP250M,518

Manufacturer Part Number
PIP250M,518
Description
IC CONV DC/DC BUCK 68-HVQFN
Manufacturer
NXP Semiconductors
Type
Step-Down (Buck)r
Datasheet

Specifications of PIP250M,518

Internal Switch(s)
Yes
Synchronous Rectifier
Yes
Number Of Outputs
1
Voltage - Output
Adj to 0.8V
Current - Output
15A
Frequency - Switching
300kHz
Voltage - Input
5V
Operating Temperature
-40°C ~ 125°C
Mounting Type
Surface Mount
Package / Case
68-VQFN Exposed Pad, 68-HVQFN, 68-SQFN, 68-DHVQFN
Power - Output
3.6W
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
568-2329-2
934057515518
PIP250M /T3
Philips Semiconductors
9397 750 10904
Product data
7.2.6 Undervoltage and overvoltage protection
With reference to
undervoltage comparators, labelled OVP and UVP respectively. In normal operation,
the voltage on FB is regulated at 0.8 V.
If the voltage on FB exceeds the overvoltage protection (OVP) threshold (1 V) for
longer than 30 s, an overvoltage condition is detected, the gate drive signals to the
MOSFETs are disabled, and the PIP250M latches off. To reset the latch, the
PIP250M must be powered down by reducing V
threshold and then increasing V
If the voltage on FB drops below the undervoltage protection (UVP) threshold (0.5 V)
for longer than 30 s, then an undervoltage condition is detected and the gate drive
signals to the MOSFET drivers are turned off. If three undervoltage pulses are
detected then the PIP250M latches off. To reset the PIP250M, the supply voltage
(V
back up to 5 V.
Fig 5. Overcurrent trip level as a function of R
DDC
) must be reduced below the power down reset threshold and then increased
Rev. 02 — 21 February 2003
Figure
I TRIP
(A)
30
20
10
1, the FB pin is connected internally to the overvoltage and
0
1
DDC
back up to 5 V.
2
OCSET
DDC
3
below the power down reset
R OCSET (k )
.
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
Integrated buck converter
03ak48
4
PIP250M
7 of 19

Related parts for PIP250M,518