6N134/883B#200 Avago Technologies US Inc., 6N134/883B#200 Datasheet - Page 5

• Manufacturer Part Number: 6N134/883B#200
• Description: OPTOCOUPLER HIGH CMR HERM 16DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of 6N134/883B#200

• Input Type: DC
• Package / Case: 16-DIP (0.300", 7.62mm)
• Voltage - Isolation: 1500VDC
• Number Of Channels: 2, Unidirectional
• Current - Output / Channel: 25mA
• Data Rate: 10MBd
• Propagation Delay High - Low @ If: 55ns @ 13mA
• Current - Dc Forward (if): 20mA
• Output Type: Open Collector
• Mounting Type: Through Hole
• Isolation Voltage: 2500 Vrms
• Maximum Continuous Output Current: 25 mA
• Maximum Fall Time: 40 ns
• Maximum Forward Diode Current: 20 mA
• Maximum Rise Time: 90 ns
• Output Device: Logic Gate Photo IC
• Configuration: 2 Channel
• Current Transfer Ratio: 100 %
• Maximum Baud Rate: 10 MBps
• Maximum Forward Diode Voltage: 1.9 V
• Maximum Reverse Diode Voltage: 5 V
• Maximum Input Diode Current: 20 mA
• Maximum Power Dissipation: 200 mW
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 55 C
• Number Of Elements: 2
• Baud Rate: 10Mbps
• Forward Voltage: 1.9V
• Forward Current: 20mA
• Output Current: 25mA
• Package Type: PDIP
• Operating Temp Range: -55C to 125C
• Fall Time: 40ns
• Rise Time: 90ns
• Power Dissipation: 200mW
• Propagation Delay Time: 140ns
• Pin Count: 16
• Mounting: Through Hole
• Reverse Breakdown Voltage: 5V
• Operating Temperature Classification: Military
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

Hermetic Optocoupler Options
Solder contains lead.
5
Option
100
200
300
Description
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available
on commercial and hi-rel product in 8 and 16 pin DIP (see drawings below for details).
Lead finish is solder dipped rather than gold plated. This option is available on commercial and hi-rel product
in 8 and 16 pin DIP. DSCC Drawing part numbers contain provisions for lead finish. All leadless chip carrier
devices are delivered with solder dipped terminals as a standard feature.
Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is avail-
able on commercial and hi-rel product in 8 and 16 pin DIP (see drawings below for details). This option has
solder dipped leads.
0.51 (0.020)
0.51 (0.020)
0.51 (0.020)
0.51 (0.020)
2.29 (0.090)
2.79 (0.110)
2.29 (0.090)
2.79 (0.110)
MIN.
MIN.
MIN.
MIN.
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
2.29 (0.090)
2.79 (0.110)
2.29 (0.090)
2.79 (0.110)
0.51 (0.020)
0.51 (0.020)
1.14 (0.045)
1.40 (0.055)
1.40 (0.055)
1.65 (0.065)
MAX.
MAX.
4.57 (0.180)
4.32 (0.170)
MAX.
MAX.
5° MAX.
0.51 (0.020)
0.51 (0.020)
MAX.
MAX.
1.14 (0.045)
1.40 (0.055)
1.40 (0.055)
1.65 (0.065)
0.20 (0.008)
0.33 (0.013)
9.65 (0.380)
9.91 (0.390)
7.36 (0.290)
7.87 (0.310)
4.32 (0.170)
4.57 (0.180)
0.20 (0.008)
0.33 (0.013)
MAX.
MAX.
4.57 (0.180)
MAX.