NHD-240128WG-AFTI-VZ#C5 Newhaven Display, NHD-240128WG-AFTI-VZ#C5 Datasheet - Page 14

• Manufacturer Part Number: NHD-240128WG-AFTI-VZ#C5
• Description: LCD MOD GRAPHIC 240X128 TRANSM
• Manufacturer: Newhaven Display

Specifications of NHD-240128WG-AFTI-VZ#C5

• Display Type: FSTN - Film Super-Twisted Nematic
• Display Mode: Transmissive
• Viewing Area: 129.00mm L x 75.00mm W
• Backlight: CCFL - White
• Dot Size: 0.47mm W x 0.47mm H
• Dot Pitch: 0.50mm x 0.50mm
• Dot Pixels: 240 x 128
• Interface: Parallel
• Pixel Density: 240 x 128
• Fluid Type: FSTN Negative
• Module Size (w X H X T): 170 mm x 103.5 mm x 14 mm
• Backlighting: LED White
• Operating Temperature Range: - 20 C to + 70 C
• Product: Graphic LCD Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Setting registers
CODE
00100001
00100010
00100100
(1) Set Cursor Pointer
(2) Set Offset Register
The position of the cursor is specified by X ADRS and Y ADRS. The cursor position can only
be moved by this command. Data read/write from the MPU never changes the cursor pointer. X
ADRS and Y ADRS are specified as follows.
Single-Scan
X ADRS 00 to 4FH
The offset register is used to determine the external character generator RAM area.
The T6963C has a 16-bit address bus as follows.
T6963C assign External character generator, when character code set 80H TO FFH in using
internal character generator. Character code 00H to 80H assign External character generator, when
Y ADRS 00H to 0FH
X ADRS
Y ADRS
21H
23H
24H
HEX.
1111× 001
1111× 001
1111× 010
1111× 100
1111× 101
1111× 011
1111× 110
1111× 110
11111×××
00H to 1FH (lower 5 bits are valid)
00H to 4FH (lower 7 bits are valid)
SET CURSOR POINTER
SET OFFSET REGISTER
FUNCTION
SET ADDRESS POINTER
Bit Set
Bit 0 (LSB)
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7 (MSB)
D1
X ADRS
DATA
LOW ADRS HIGH ADRS
D2
Y ADRS
00H
X: invalid