AFBR-53D5Z Avago Technologies US Inc., AFBR-53D5Z Datasheet - Page 3

• Manufacturer Part Number: AFBR-53D5Z
• Description: TXRX OPTICAL 5V GBE 1X9
• Manufacturer: Avago Technologies US Inc.
• Series: -r

Specifications of AFBR-53D5Z

• Applications: Ethernet
• Connector Type: SC
• Wavelength: 850nm
• Voltage - Supply: 4.75 V ~ 5.25 V
• Mounting Type: Through Hole
• Supply Voltage: 5V
• Wavelength Typ: 850nm
• Leaded Process Compatible: Yes
• Data Rate: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Rate: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Eye Safety
These laser-based transceivers are classified as AEL Class
I (U.S. 21 CFR(J) and AEL Class 1 per EN 60825-1 (+A11).
They are eye safe when used within the data sheet lim-
its per CDRH. They are also eye safe under normal op-
erating conditions and under all reasonably forseeable
single fault conditions per EN60825-1. Avago Technolo-
gies has tested the transceiver design for compliance
with the requirements listed below under normal op-
erating conditions and under single fault conditions
where applicable. TUV Rheinland has granted certi-fica-
tion to these transceivers for laser eye safety and use
in EN 60950 and EN 60825-2 applications. Their perfor-
mance enables the transceivers to be used without con-
cern for eye safety up to 7 volts transmitter VCC.
Regulatory Compliance

Feature
Electrostatic Discharge (ESD)
to the Electrical Pins
Electrostatic Discharge (ESD)
to the Duplex SC Receptacle
Electromagnetic Interference
(EMI)
Immunity
Laser Eye Safety and
Equipment Type Testing
Component Recognition
Test Method
MIL-STD-883C
Method 3015.4
Variation of IEC 801-2
FCC Class B
CENELEC EN55022 Class B
(CISPR 22A)
VCCI Class I
Variation of IEC 61000-4-3
US 21 CFR, Subchapter J per Para-
graphs 1002.10 and 1002.12
EN60950-2000
EN60825-1:1994+A1:2002+A2:2001
EN60825-2:2000
Underwriters Laboratories and Ca-
nadian Standards Association Joint
Component Recognition for Informa-
tion Technology Equipment Including
Electrical Business Equipment.
CAUTION:
There are no user serviceable parts nor any mainte-
nance required for the AFBR-53D5Z. All adjustments are
made at the factory before shipment to our customers.
Tampering with or modifying the performance of the
AFBR-53D5Z will result in voided product warranty.
It may also result in improper operation of the AFBR-
53D5Z circuitry, and possible overstress of the laser
source. Device degradation or product failure may re-
sult.
Connection of the AFBR-53D5Z to a nonapproved opti-
cal source, operating above the recommended absolute
maximum conditions or operating the AFBR-53D5Z in a
manner inconsistent with its design and function may
result in hazardous radiation exposure and may be con-
sidered an act of modifying or manufacturing a laser
product. The person(s) performing such an act is re-
quired by law to recertify and reidentify the laser prod-
uct under the provisions of U.S. 21 CFR (Subchapter J).
Performance
Class 1 (>2000V).
Typically withstand at least 15 kV
without damage when the duplex SC
connector receptacle is contacted by a
Human Body Model probe.
Margins are dependent on customer
board and chassis designs.
Typically show no measurable effect
from a 10 V/m field swept from 27 to
1000 MHz applied to the transceiver
without a chassis enclosure.
AEL Class I, FDA/CDRH
AFBR-53D5Z Accenssion #9720151-53
AEL Class 1, TUV Rheinland of North
America AFBR-53D5Z
Certificate #09771047.028
Protection Class III
UL File E173874