APTH006A0X4-SRZ Lineage Power, APTH006A0X4-SRZ Datasheet - Page 12
![DC-DC 0.6-3.63V @ 6A](/photos/8/70/87046/mfg_apth00_series__apts00_series__apxh00_series__apxs00_series_sml.jpg)
APTH006A0X4-SRZ
Manufacturer Part Number
APTH006A0X4-SRZ
Description
DC-DC 0.6-3.63V @ 6A
Manufacturer
Lineage Power
Series
Pico TLynx™r
Type
Point of Load (POL) Non-Isolated with Remote On/Offr
Datasheet
1.APTH006A0X-SRZ.pdf
(23 pages)
Specifications of APTH006A0X4-SRZ
Output
0.6 ~ 3.63V
Number Of Outputs
1
Power (watts)
21W
Mounting Type
Surface Mount
Voltage - Input
2.4 ~ 5.5V
Package / Case
10-SMD Module
1st Output
0.6 ~ 3.63 VDC @ 6A
Size / Dimension
0.48" L x 0.48" W x 0.29" H (12.2mm x 12.2mm x 7.3mm)
Power (watts) - Rated
21W
Operating Temperature
-40°C ~ 85°C
Efficiency
93%
Approvals
CSA, EN, UL, VDE
Product
Non-Isolated / POL
Output Power
22 W
Input Voltage Range
2.4 V to 5.5 V
Output Voltage (channel 1)
0.6 V to 3.63 V
Output Current (channel 1)
6 A
Output Type
Non-Isolated
Output Voltage
0.6 V to 3.63 V
Output Current
6A
Input Voltage
2.4 to 5.5V
Screening Level
Industrial
Mounting Style
Surface Mount
Pin Count
10
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
3rd Output
-
2nd Output
-
Lead Free Status / Rohs Status
Details
Data Sheet
April 7, 2011
Output Filtering
The Pico TLynx
output ripple voltage and will meet the maximum output
ripple specification with 0.1 µF ceramic and 10 µF
ceramic capacitors at the output of the module.
However, additional output filtering may be required by
the system designer for a number of reasons. First,
there may be a need to further reduce the output ripple
and noise of the module.
response characteristics may need to be customized to
a particular load step change.
To reduce the output ripple and improve the dynamic
response to a step load change, additional capacitance
at the output can be used.
ceramic capacitors are recommended to improve the
dynamic response of the module. Figure 36 provides
output
capacitance values at various Vo and for load currents
of 6A while maintaining an input voltage of 5V. Fig 37
shows the performance with a 3.3V input. For stable
operation of the module, limit the capacitance to less
than the maximum output capacitance as specified in
the electrical specification table. Optimal performance
of the module can be achieved by using the Tunable
Loop
Figure 36. Output ripple voltage for various output
voltages with external 1x10 µF, 1x47 µF, 2x47 µF or
4x47 µF ceramic capacitors at the output (6A load).
Input voltage is 5V.
LINEAGE
25
20
15
10
5
0
TM
0.5
feature described later in this data sheet.
ripple
POWER
1
TM
information
6A modules are designed for low
1.5
Output Voltage(Volts)
1x10uF External Cap
1x47uF External Cap
2x47uF External Cap
4x47uF External Cap
2
for
Low ESR polymer and
Second, the dynamic
2.4 – 5.5Vdc input; 0.6Vdc to 3.63Vdc output; 6A output current
2.5
different
3
Pico TLynx
external
3.5
Figure 37. Output ripple voltage for various output
voltages with external 1x10 µF, 1x47 µF, 2x47 µF or
4x47 µF ceramic capacitors at the output (6A load).
Input voltage is 3.3V.
Safety Considerations
For safety agency approval the power module must be
installed in compliance with the spacing and separation
requirements of the end-use safety agency standards,
i.e., UL 60950-1, CSA C22.2 No. 60950-1-03, and VDE
0850:2001-12 (EN60950-1) Licensed.
For the converter output to be considered meeting the
requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements. The power
module has extra-low voltage (ELV) outputs when all
inputs are ELV.
The input to these units is to be provided with a fast-
acting fuse with a maximum rating of 6A in the positive
input lead
TM
20
15
10
6A: Non-isolated DC-DC Power Modules
5
0
0.5
.
1
1x10uF External Cap
1x47uF External Cap
2x47uF External Cap
4x47uF External Cap
Output Voltage(Volts)
1.5
2
2.5
3
12