122-27400 Parallax Inc, 122-27400 Datasheet - Page 67

• Manufacturer Part Number: 122-27400
• Description: MANUAL FOR SUMOBOT
• Manufacturer: Parallax Inc

Specifications of 122-27400

• Accessory Type: Manual
• Product: Microcontroller Accessories
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SumoBot®
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

Article 6
Section 4: Match Principles
Article 7
5. For stand-alone robots, any control mechanisms can be employed.
6. Stand-alone models must be so designed that a robot starts operating a
7. Microcomputers in a robot can be of any manufacturers and any memory
Restrictions on Robot Design
1. Jamming devices, such as an IR LED intended to saturate the opponents IR
2. Do not use parts that could break or damage the Ring. Do not use parts that
3. Do not put into a robot's body devices that can store liquid, powder, or air, in
4. Do not use any inflaming devices.
5. Do not use devices that throw things at your opponent.
6. Do not stick a robot down onto the Ring, using sucking devices or glue, or
Match Principles
1. One match shall consist of 3 rounds, within a total time of 3 minutes, unless
Futaba's, JR's, Sanwa's, or Kondo Kagaku's.
minimum of five seconds after a start switch is pressed (or any method that
invokes the operation of a robot).
sizes can be chosen.
sensor, are not allowed. Do not disturb your opponent's radio-control by
putting into a robot's body such devices as a jamming device.
are intended to damage the opponent's robot or its operator. Normal pushes
and bangs are not considered intent to damage.
which are thrown at the opponent.
use any type of sticky tires (such as double sticky foam tape) or any device
to assist in adding more down force (such as a vacuum device).
Appendix B: Standard Mini-Sumo Competition · Page 57