ST62GP-DBE STMicroelectronics, ST62GP-DBE Datasheet - Page 40

• Manufacturer Part Number: ST62GP-DBE
• Description: DEDICATED BOARD FOR ST EMULATORS
• Manufacturer: STMicroelectronics

Specifications of ST62GP-DBE

• Accessory Type: Emulator Adaptor
• For Use With/related Products: ST62GP-EMU2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5 - Emulator Features
5.4
5.5
40/57
External signal input on OSCIN pin
To select this,
1
2
Changing the oscillator on the probe board
If you install a crystal or a ceramic resonator on the probe board, you must change
the value of the C4 and C5 capacitors (C3 and C4 capacitors in the case of a
DB324 probe board) accordingly (see
The capacitors installed (470 pF, 1000 pF) have been tested with crystals in the
range 1 to 4 MHz; however, the results you obtain will depend on the
characteristics of the crystal you use.
These two capacitors can be modified.
Select EXTERNAL in the menu Command -> Micro_Configuration ->
Frequency.
Install a jumper between pins 2-3 of W1 and pins 1-2 of W2 on the probe board.
Figure 18: Probe board layout
Figure 18
ST62GP-EMU2 Emulator User Manual
).
M74HC04 (drives user-
installable oscillator)