TOOLSTICK582DC Silicon Laboratories Inc, TOOLSTICK582DC Datasheet - Page 5

• Manufacturer Part Number: TOOLSTICK582DC
• Description: DAUGHTER CARD TOOLSTICK F582
• Manufacturer: Silicon Laboratories Inc
• Series: ToolStickr

Specifications of TOOLSTICK582DC

• Accessory Type: Daughter Card
• Processor To Be Evaluated: C8051F58
• Interface Type: USB
• Operating Supply Voltage: 2.7 V to 3.6 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: *
• For Use With: 336-1345 - TOOLSTICK BASE ADAPTER336-1182 - ADAPTER USB DEBUG FOR C8051FXXX
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1584

ToolStick-F582DC
5.4. Keil µVision2 and µVision3 Silicon Laboratories Drivers
As an alternative to the Silicon Laboratories IDE, the µVision debug driver allows the Keil µVision2 and µVision3
IDEs to communicate with Silicon Laboratories on-chip debug logic. In-system Flash memory programming
integrated into the driver allows for rapidly updating target code. The µVision2 and µVision3 IDEs can be used to
start and stop program execution, set breakpoints, check variables, inspect and modify memory contents, and
single-step through programs running on the actual target hardware.
For more information, please refer to the µVision driver documentation. The documentation and software are
available from the Downloads webpage (www.silabs.com/mcudownloads).
5.5. ToolStick Terminal
The ToolStick Terminal program provides the standard terminal interface to the target microcontroller's UART.
However, instead of requiring the usual RS-232 and COM port connection, ToolStick Terminal uses the USB
interface of the ToolStick Base Adapter to provide the same functionality.
In addition to the standard terminal functions (send file, receive file, change baud rate), two GPIO pins on the target
microcontroller can be controlled using the Terminal for either RTS/CTS handshaking or software-configurable
purposes (see the demo software for an example).
See Section "6.8. Using ToolStick Terminal‚" on page 12 for more information. The software is available on the
ToolStick webpage (www.silabs.com/toolstick).
Rev. 0.1
5