AD9958/PCBZ Analog Devices Inc, AD9958/PCBZ Datasheet - Page 5

• Manufacturer Part Number: AD9958/PCBZ
• Description: BOARD EVALUATION FOR AD9958
• Manufacturer: Analog Devices Inc
• Series: AgileRF™r

Specifications of AD9958/PCBZ

• Design Resources: Low Jitter Sampling Clock Generator for High Performance ADCs Using AD9958/9858 and AD9515 (CN0109) Phase Coherent FSK Modulator (CN0186)
• Main Purpose: Timing, Direct Digital Synthesis (DDS)
• Embedded: No
• Utilized Ic / Part: AD9958
• Primary Attributes: 10-Bit DAC, 32-Bit Tuning Word Width
• Secondary Attributes: 500MHz, Graphical User Interface, 2-Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EVALUATION BOARD SOFTWARE
INSTALLING THE SOFTWARE
Follow these steps to install the AD9958 evaluation software.
1.
2.
3.
4.
CONFIGURING THE EVALUATION BOARD
Once the software has been successfully installed onto your PC,
the next step is to interface the AD9958 evaluation software to
the AD9958 evaluation board via the USB Port (see Figure 2).
For the evaluation board and software to communicate
properly, drivers must be loaded onto your PC system. The
following instructions explain how to install these drivers on
your PC system.
Windows 98/Windows ME/Windows 2000 Users
1.
2.
3.
Log on to your PC system with administrative privileges;
this is an essential requirement in successfully installing
the AD9958 evaluation software.
Uninstall any previous versions of the AD9958 evaluation
software from your PC system.
Insert the AD9958 evaluation software CD into your
CD-ROM drive. It is important not to connect the
AD9958 evaluation board to the computer until the
AD9958 evaluation software has been successfully
installed. Refer to the Readme.txt file located in the
Software folder before proceeding with the installation
of the AD9958 evaluation software.
Run the setup.exe file located in the Software folder and
follow the AD9958 evaluation software’s on-screen
installation instructions.
Power up the AD9958 evaluation board (see Table 2).
Connect the evaluation board to the computer using a USB
cable via the USB port; the VBUS LED (CR1 on AD9958
evaluation board) illuminates.
When the USB cable is connected, this window appears
and then disappears (Figure 3).
Figure 3.
Rev. 0 | Page 5 of 28
4.
5.
6.
After the window has disappeared, the USB Status LED (CR2
on the AD9958 evaluation board) flashes, which indicates that
the evaluation board is connected properly.
Then, this window (Figure 4) appears and disappears.
If you are using Windows 2000, click Finish if you see this
window (Figure 5).
Next, the window in Figure 6 appears.
Figure 4.
Figure 5.
Figure 6.
AD9958/PCB