POE-VOICE-RD Silicon Laboratories Inc, POE-VOICE-RD Datasheet - Page 19

• Manufacturer Part Number: POE-VOICE-RD
• Description: KIT REF DESIGN PWR OVER ETHERNET
• Manufacturer: Silicon Laboratories Inc

Specifications of POE-VOICE-RD

• Main Purpose: Reference Design, Power Over Ethernet , Voice Transmission
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: C8051F340, CP2201, Si3400
• Primary Attributes: Embedded Ethernet, Power over Ethernet, 8 kHz Voice Sampling System
• Secondary Attributes: Graphical User Interface
• Processor To Be Evaluated: C8051F340
• Interface Type: Ethernet
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1326

PC Configuration
The steps below show how to configure a Windows 2000/XP PC to use a static IP address. The SET_STATIC.bat
and SET_DHCP.bat batch files included in the reference design software directory may be used to automate this
process.
1. Open the Network Connections Folder. This is accessible from the control panel or from the start menu by
2. Right-click on the Local Area Connection and select Properties.
3. Select Internet Protocol (TCP/IP) and click Properties. Optionally, if the Show icon in notification area when
4. Select Use the following IP address and specify an IP address and subnet mask for the PC. For a subnet
5. Click OK after the static IP address and subnet mask have been configured. The PC will now be able to
right-clicking on My Network Places and selecting Properties.
connected is checked, right-clicking the system tray icon will provide a quick shortcut to the LAN properties
dialog and can be used as an indicator that the network is functioning properly.
mask of 255.255.255.0, the embedded system’s IP address must match the first three octets of the PC’s IP
address for the PC to recognize the embedded system. See Section Selecting an IP Address for the
Embedded System on the next page for additional information about choosing the embedded system’s IP
address.
Note: When entering an IP or subnet address into the dialog box, the cursor will automatically advance to
the next field for a three digit octet. If entering a one or two digit octet, the spacebar, right arrow key, or ‘.’
can be pressed to advance to the next field.
access the embedded system using a crossover cable.
Figure 22. IP Address and Subnet Mask Window
Figure 21. Internet Protocol Properties Window
Rev. 0.2
PoE-VOICE-RD
19