POE-VOICE-RD Silicon Laboratories Inc, POE-VOICE-RD Datasheet - Page 5

• Manufacturer Part Number: POE-VOICE-RD
• Description: KIT REF DESIGN PWR OVER ETHERNET
• Manufacturer: Silicon Laboratories Inc

Specifications of POE-VOICE-RD

• Main Purpose: Reference Design, Power Over Ethernet , Voice Transmission
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: C8051F340, CP2201, Si3400
• Primary Attributes: Embedded Ethernet, Power over Ethernet, 8 kHz Voice Sampling System
• Secondary Attributes: Graphical User Interface
• Processor To Be Evaluated: C8051F340
• Interface Type: Ethernet
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1326

3. Click the Assign IP... button.
Important Note: If the network does not have a DHCP server, then the PoE-VOICE-EB will search for
approximately 35 seconds before going into static IP address mode. While searching, the yellow and greed
LEDs will be blinking fast and the device will not respond to Netfinder requests, therefore, will not be
found by the PC application. After going into static IP address mode, the PC application will be able to
display information about the device.
4. Enter the IP address, subnet mask, and default gateway (if known) into the ‘Assign IP Address’ dialog and
5. Press Done when the assignment is complete. Then click View Data... on the main panel as shown in
Note:“0.0.0.1” is an invalid placeholder address that indicates that the device needs to be assigned a valid
IP address.
press Assign Address. See "Appendix—Using a Crossover Cable" on page 18 for information on how to
configure the PC with a static IP address and how to select a static IP address for the embedded system.
Programming is successful when the status box displays the message “Succeeded!”.
Figure 4.
Figure 5. Assign IP Button
Figure 6. Assign IP Button
Rev. 0.2
PoE-VOICE-RD
5