DV164122 Microchip Technology, DV164122 Datasheet - Page 15

• Manufacturer Part Number: DV164122
• Description: ANALYZER SRL PICKIT W/DEMO BOARD
• Manufacturer: Microchip Technology
• Series: PICkit™r
• Type: MCUr

Specifications of DV164122

• Contents: PICkit™ Serial Analyzer, 28-pin Demo Board, USB Cable, and Software with Documentation CD
• Processor To Be Evaluated: PIC16F886
• Interface Type: USB
• Silicon Manufacturer: Microchip
• Kit Application Type: Interface
• Application Sub Type: USB
• Silicon Family Name: PIC16F
• Kit Contents: PICkit Serial Analyzer, Demo Board, USB Cable, Software
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: PIC16F886
• For Use With: PKSERIAL-SPI1 - BOARD DEMO PICKIT SERIAL SPIPKSERIAL-I2C1 - BOARD DEMO PICKIT SERIAL I2C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q3260228

2.1
2.2
2.3
2.4
© 2007 Microchip Technology Inc.
INTRODUCTION
HIGHLIGHTS
INSTALLING THE PICkit™ SERIAL ANALYZER SOFTWARE
CONNECTING THE PICkit™ SERIAL ANALYZER TO THE PC
This chapter will get you started using the PICkit™ Serial Analyzer with the 28-Pin
Demo Board. In this demo, the PICkit™ Serial Analyzer will communicate with the
28-Pin Demo Board using the I
the I
Demo board is programmed to emulate an I
For more information about the 28-Pin Demo Board hardware, see the 28-Pin Demo
Board User’s Guide (DS41301).
For more information about the 28-Pin Demo Board I
Appendix B. “28-Pin Demo Board I
The demo program source code and *.hex file can be found on the PICkit™ Serial
CD-ROM at D:\28-pin Demo Board\Firmware\.
This chapter discusses:
• Installing the PICkit™ Serial Analyzer Software
• Connecting the PICkit Serial Analyzer to the PC
• Connecting the PICkit Serial Analyzer to the 28-Pin Demo Board
• Starting the PICkit Serial Analyzer Program
• Running The 28-Pin Demo I
• I
• 28-Pin Demo I
Insert the PICKit™ Serial Analyzer CD-ROM into the CD-ROM drive. In a few moments
the introductory screen should be displayed. Follow the directions on the screen to
install the PICkit Serial Analyzer software.
If the introductory screen does not appear, browse to the CD-ROM directory and select
the AutorunPro.exe program.
Connect the PICkit Serial Analyzer to the PC using the supplied USB cable. There are
no USB drivers to install. The green Power indicator should light indicating that the
PICkit Serial Analyzer is powered.
2
Note:
C Communications – Basic Operations
2
C Master and the 28-Pin Demo Board will be the I
Chapter 2. Getting Started
The PICkit™ Serial Analyzer program requires the Microsoft
Framework Version 2.0. If the .NET Framework is not installed on your
computer (or if in doubt), select the application plus Microsoft
Framework installation.
2
C™ Source Code and Firmware
2
PICkit™ SERIAL ANALYZER
2
C™ Demonstration Program
C serial protocol. The PICkit™ Serial Analyzer will be
2
C™ Demonstration Firmware”.
2
C real-time clock and Serial EEPROM.
2
C™ demo firmware, see
2
C Slave device. The 28-Pin
USER’S GUIDE
DS51647A-page 9
®
®
.NET
.NET