P0528 Terasic Technologies Inc, P0528 Datasheet - Page 7

• Manufacturer Part Number: P0528
• Description: BOARD DEV DE1 ALTERA
• Manufacturer: Terasic Technologies Inc
• Type: FPGAr

Specifications of P0528

• Contents: DE1 Board, Power Supply, USB Cable, Plastic cover and software
• For Use With/related Products: Cyclone II 2C20
• For Use With: P0033 - BOARD ADAPTER HSMC TO GPIOP0006 - BOARD ADAPTER THDB-SUMP0001 - MODULE DIGITAL CAMERA 5MP (D5M)P0307 - KIT DEV 4.3" LCD TOUCH PANEL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DE1

The following hardware is provided on the DE1 board:
In addition to these hardware features, the DE1 board has software support for standard I/O
interfaces and a control panel facility for accessing various components. Also, software is provided
for a number of demonstrations that illustrate the advanced capabilities of the DE1 board.
In order to use the DE1 board, the user has to be familiar with the Quartus II software. The
necessary knowledge can be acquired by reading the tutorials Getting Started with Altera’s DE1
Board and Quartus II Introduction (which exists in three versions based on the design entry method
used, namely Verilog, VHDL or schematic entry). These tutorials are provided in the directory
DE1_tutorials on the DE1 System CD-ROM that accompanies the DE1 board and can also be
found on Altera’s DE1 web pages.
• Altera Cyclone
• Altera Serial Configuration device – EPCS4
• USB Blaster (on board) for programming and user API control; both JTAG and Active Serial
• 512-Kbyte SRAM
• 8-Mbyte SDRAM
• 4-Mbyte Flash memory
• SD Card socket
• 4 pushbutton switches
• 10 toggle switches
• 10 red user LEDs
• 8 reen user LEDs
• 50-MHz oscillator, 27-MHz oscillator and 24-MHz oscillator for clock sources
• 24-bit CD-quality audio CODEC with line-in, line-out, and microphone-in jacks
• VGA DAC (4-bit resistor network) with VGA-out connector
• RS-232 transceiver and 9-pin connector
• PS/2 mouse/keyboard connector
• Two 40-pin Expansion Headers with resistor protection
• Powered by either a 7.5V DC adapter or a USB cable
(AS) programming modes are supported
®
II 2C20 FPGA device
5
DE1 User Manual