SDK-PXA270-520-10-6432R Logic, SDK-PXA270-520-10-6432R Datasheet - Page 14

• Manufacturer Part Number: SDK-PXA270-520-10-6432R
• Description: KIT DEV ZOOM STARTER FOR PXA270
• Manufacturer: Logic
• Series: Zoom™r
• Type: Single Board Computers (SBC)r

Specifications of SDK-PXA270-520-10-6432R

• Contents: Intel PXA270 Card Engine, Application Board, Power Supply, Adapters, and Software
• For Use With/related Products: Intel PXA270
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 460-3472; SDK-PXA270-520-10-6432R

12
ZOOM SDK
QuickStart Guide
RS-232 null-modem
cable to host PC
3.3 Connecting the Zoom Starter Development Kit to your PC
Figure 3.3 – Connecting the Baseboard to your PC
1.
2.
3.
Connect the null-modem serial cable (supplied in the kit) to the serial port
connector on the baseboard and to a COM port on the host PC (see Figure 3.3).
Confirm JTAG settings for use with your specific Card Engine as shown in
Table 3.4.
Note: Do not enable JTAG unless you intend to use the JTAG with an emulation
tool.
Connect the regulated 5 volt power supply to the appropriate power adapter. Plug
the power adapter into a power outlet and the 5 volt line-output connector into the
power connector on the application baseboard as shown above in Figure 3.3.
Note: The Japan power adapter is labeled; the US adapter is not.
Power supply & power adapter
(Europe, Japan, UK, or US)