101-0359 Rabbit Semiconductor, 101-0359 Datasheet - Page 16
![KIT DEVELOPMENT BASIC RABBIT2000](/photos/9/24/92474/101-0359_sml.jpg)
101-0359
Manufacturer Part Number
101-0359
Description
KIT DEVELOPMENT BASIC RABBIT2000
Manufacturer
Rabbit Semiconductor
Series
RabbitCore 2000r
Type
MPU Moduler
Datasheet
1.101-0359.pdf
(54 pages)
Specifications of 101-0359
Rohs Status
RoHS non-compliant
Contents
RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
Processor To Be Evaluated
Rabbit 2000
Interface Type
RS-232, RS-485
For Use With/related Products
RCM2000, RCM2010, RCM2020
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
316-1003
2.3.2 Connect Programming Cable
The programming cable connects the BL1810 to the PC running Dynamic C to download
programs and to monitor the BL1810 during debugging.
Connect the 10-pin connector of the programming cable labeled
the BL1810 as shown in Figure 3. Be sure to orient the marked (usually red) edge of the
cable towards pin 1 of the connector. (Do not use the
normal serial connection.)
Connect the other end of the programming cable to a COM port on your PC.
12
NOTE: Use only the programming cable that has a red shrink wrap around the RS-232
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use
level converter (Z-World part number 101-0513), which is supplied with the Develop-
ment Kit. Other Z-World programming cables might not be voltage-compatible or their
connector sizes may be different.
an RS-232/USB converter with the programming cable supplied with the Rabbit 2000
Development Kit. An RS-232/USB converter is available through the Z-World Web store.
Figure 3. Power and Programming Cable Connections to the BL1810
DIAG
connector, which is used for a
Rabbit 2000 Development Kit
PROG
to header J3 on