101-0359 Rabbit Semiconductor, 101-0359 Datasheet - Page 28
![KIT DEVELOPMENT BASIC RABBIT2000](/photos/9/24/92474/101-0359_sml.jpg)
101-0359
Manufacturer Part Number
101-0359
Description
KIT DEVELOPMENT BASIC RABBIT2000
Manufacturer
Rabbit Semiconductor
Series
RabbitCore 2000r
Type
MPU Moduler
Datasheet
1.101-0359.pdf
(54 pages)
Specifications of 101-0359
Rohs Status
RoHS non-compliant
Contents
RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
Processor To Be Evaluated
Rabbit 2000
Interface Type
RS-232, RS-485
For Use With/related Products
RCM2000, RCM2010, RCM2020
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
316-1003
3.1.2 RS-232 Serial Communication Sample Programs
•
•
24
JR_FLOWCONTROL.C
uring Serial Port C (PC3/PC2) for CTS/RTS with serial data coming from TxB at
115,200 bps. One character at a time is received and is displayed in the
To set up the Prototyping Board, you will need to tie PC4 and PC5 (TxB
and RxB) together at header J1, and you will also tie PC2 and PC3 (TxC
and RxC) together as shown in the diagram.
A repeating triangular pattern should print out in the
program will periodically switch flow control on or off to demonstrate
the effect of no flow control.
Refer to the
ence Manual for a general description on how to set up flow control lines.
JR_PARITY.C
repeatedly sending byte values 0–127 from Serial Port B to Serial Port C.
The program will switch between generating parity or not on Serial Port
B. Serial Port C will always be checking parity, so parity errors should
occur during every other sequence.
To set up the Prototyping Board, you will need to tie PC4 and PC3 (TxB and RxC)
together at header J1 as shown in the diagram.
The Dynamic C
serBflowcontrolOn()
—This program demonstrates the use of parity modes by
STDIO
—This program demonstrates hardware flow control by config-
window will display the error sequence.
function call in the Dynamic C Function Refer-
STDIO
window. The
Rabbit 2000 Development Kit
STDIO
window.