101-1017 Rabbit Semiconductor, 101-1017 Datasheet - Page 24

• Manufacturer Part Number: 101-1017
• Description: KIT DEV POWERCORE 3800 INT'L
• Manufacturer: Rabbit Semiconductor
• Series: PowerCore FLEXr
• Type: MPU Moduler

Specifications of 101-1017

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: PowerCore 38xx
• Interface Type: Ethernet
• For Use With/related Products: RCM3800
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3.2 Sample Programs
Of the many sample programs included with Dynamic C, several are specific to the
PowerCore FLEX modules. Sample programs illustrating the general operation of the
PowerCore FLEX modules, serial communication, the serial flash, A/D conversion, D/A
conversion, and hardware accessories such as a temperature sensor and triacs are provided
in the
describe the purpose and function of the program. Follow the instructions at the beginning
of the sample program. Note that the PowerCore module must be installed on the Proto-
typing Board when using the sample programs described in this chapter. TCP/IP sample
programs are described in Chapter 6, “Using the TCP/IP Features,” and sample programs
for the optional LCD/keypad module are described in Appendix C.
3.2.1 I/O
The following sample programs can be found in the
folder.
•
•
16
DIGIN.c
Press switches S2 and S3 on the Prototyping Board to change the logic levels for IN0
and IN1 as displayed in the Dynamic C
DIGOUT.c
100 Ω load resistors from the +5 V supply at pin 6 on header J4 or from the ground at
pin 2 on header J2 as indicated in the table below.
SAMPLES\PowerCoreFLEX
—Demonstrates how to read digital inputs using the
Sourcing
Sinking
—Demonstrates the control of sinking and sourcing digital outputs. Connect
Digital Output
OUT0
OUT1
OUT2
OUT3
folder. Each sample program has comments that
(GND to J2 pin 5)
(GND to J2 pin 6)
(+5 V to J2 pin 3)
(+5 V to J2 pin 4)
Load Resistor
STDIO
GND to OUT2
GND to OUT3
+5 V to OUT0
+5 V to OUT1
window.
SAMPLES\PowerCoreFLEX\IO
(J2 pin 1 to +5 V)
(J2 pin 1 to +5 V)
digIn
+K to + 5 V
+K to +5 V
+K
function call.
PowerCore FLEX