101-1017 Rabbit Semiconductor, 101-1017 Datasheet - Page 29

• Manufacturer Part Number: 101-1017
• Description: KIT DEV POWERCORE 3800 INT'L
• Manufacturer: Rabbit Semiconductor
• Series: PowerCore FLEXr
• Type: MPU Moduler

Specifications of 101-1017

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: PowerCore 38xx
• Interface Type: Ethernet
• For Use With/related Products: RCM3800
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

•
The following sample programs can be found in the
TEMPERATURE
•
•
User’s Manual
ADC_RD_RAMP.c
PowerCore ramp-generator A/D channels.
The voltage is calculated using coefficients read from the simulated EEPROM in flash
memory that were written during the calibration process.
THERMISTOR.c
module. Once you are running the sample program, you will be able to use the
Dynamic C
you apply hot or cold air to the thermistor. Note that the thermistor is on the PowerCore
circuit board, and so it will actually be measuring the temperature of the circuit board
and the air immediately above it. This temperature will likely be higher than the ambi-
ent temperature a short distance from the board.
THERMOFFSET.c
the PowerCore module to an external reference temperature.
Channel 0—2.5 V reference voltage
Channel 1—end-of-ramp voltage
Channel 2—thermistor
STDIO
folder.
—Demonstrates how to read the thermistor sensor on the PowerCore
—Demonstrates how to read and display the voltage of the following
—Demonstrates how to add an offset to set the thermistor sensor on
window to observe the temperature change across the thermistor as
SAMPLES\PowerCoreFLEX\
21