ST62E6XC-EPB/US STMicroelectronics, ST62E6XC-EPB/US Datasheet - Page 31

• Manufacturer Part Number: ST62E6XC-EPB/US
• Description: BOARD PROGRAMMING FOR ST625X/6X
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of ST62E6XC-EPB/US

• Contents: Programmer Board
• For Use With/related Products: ST7265x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

To prevent the device from being ever read-protected, set the UNLOCK jumper. This function
is available for devices with the OPTION byte (ST62E2XX only).
Note: EPBs are shipped with the UNLOCK jumper on.
4 Set the MASTER/TARGET switch on the TARGET position.
5 Set the PROG/VERIF switch on the PROG position.
6 Validate your settings by pressing the START switch.
The programming process begins while the red BUSY LED (LD2) starts flashing.
The LED final status reflects the result of the operation:
You can program another device without stopping the power supply: just replace the pro-
grammed microcontroller by a new blank one and push the START switch.
ROM
RAM
UNLOCK
LOCK
OTP
EPROM
DEVICE
TYPE
REMOTE
LOCAL
When lit, the green OK LED (LD4) reports a successful end of operation.
When lit, the red ERROR LED (LD3) reports an error.
W1
This jumper on
ST62EXX EPB
RAM
LOCK
OTP
EEPROM
ST636X
ST637X
ST638X
ST63E1XX
RESERVED
REMOTE
W1
EPB - Stand-Alone Mode
ST63E1XX EPB
This jumper on
28
31/39