EM2XX-ISA-R Ember, EM2XX-ISA-R Datasheet
EM2XX-ISA-R
Specifications of EM2XX-ISA-R
Related parts for EM2XX-ISA-R
EM2XX-ISA-R Summary of contents
Page 1
... Farnsworth Street Boston, MA 02210 +1 (617) 951-0200 www.ember.com InSight Adapter Technical Specification The Ember InSight Adapter is the hardware interface between the Ember EM2xx-based designs and the Ember InSight Desktop. This document describes InSight Adapter features and specifications. Contents Overview .............................................................................................. 2 Features ............................................................................................... 2 Supplying Power to the InSight Adapter.......................................................... 4 Setting Up the InSight Adapter ...
Page 2
... Packet Trace Interface, TCP/IP, and UDP for an easy-to-deploy system over 10/100 Ethernet. It also contains power management logic to transform Power-over- Ethernet (PoE) into IC-friendly voltage planes. So, you can integrate the EM2xx-based debugging environment into an existing network infrastructure and remotely deploy hardware during the development phase without having to stay close to a wall outlet. ...
Page 3
... Do not open the enclosure. If you experience issues or problems with the adapter, contact Ember Support (support@ember.com). Table 1 lists the interfaces and mechanical characteristics of the InSight Adapter. Table 1. Mechanical characteristics of the InSight Adapter ...
Page 4
... Parameter 12V DC power jack Power-over-Ethernet InSight Port current source (to RCM or EM2xx-based design) Temperature range Setting Up the InSight The Ember Developer Kit supports the InSight network, which runs over the Ethernet. Each Ember node is connected to the InSight network via its InSight adapter, which also Adapter takes node activity accessible to InSight Desktop ...
Page 5
... Figure 1 and Figure 2 show the interfaces on the front and back panels of the InSight Adapter. Figure 1. InSight Adapter front panel Insight Adapter Technical Specification The Ember Developer Kit is configured to support DHCP. If your site is All InSight adapters The workstation where InSight Desktop is installed . ...
Page 6
... InSight Adapter. The InSight Adapter can be powered either by the 12V DC jack (J3 Power-over-Ethernet. Therefore, the InSight Adapter ships with a 12V DC power supply with appropriate AC plugs for your region, while the EM2xx Kit ships with a Power-over-Ethernet injector. Note: same time. Logic in the InSight Adapter gives priority to the DC power supply. ...
Page 7
... InSight Port The 10-pin, dual-row, 0.05-inch-pitch InSight Port is the programming and debug interface for the EM2xx family of chips. It contains the four SIF Signals (SIF_MOSI, SIF_MISO, SIF_LOADB, and SIF_CLK), two Packet Trace signals (PTI_EN and PTI_DATA), and voltage and ground connections. An InSight Port cable is shipped with the InSight Adapter ...
Page 8
... InSight Data Emulation Interface The 26-pin, dual-row, Extended Debug Connector allows additional access to the EM2xx series of chips. On the EM250, it allows access from the backchannel port 4901 to the EM250 UART connection on the EM250 Breakout Board. The DEI cable is custom to the Ember InSight Adapter and is provided as part of the InSight Adapter assembly. For more information on the EM250 Breakout Board, refer to the EM250 Breakout Board Technical Specification (120-2003-000) ...
Page 9
... On ISAs built before 4/30/2006, red and orange LEDs are reversed. Voltage Selection Toggle Switch Because the EM2xx family can operate with a supply voltage between 2.1 and 3.6V and the core logic of the InSight Adapter is at either 1.8V or 3.0V, the InSight Adapter must be able to properly buffer the signals between the EM2xx and itself ...
Page 10
... This and sources as much as 50 mA. The InSight Port is disabled. This is the default shipping position. The EM2xx-based hardware contains its own power supply (such as a battery source), and the InSight Port signals are buffered to that voltage level. The InSight Port Voltage Selection Logic requires Note (max) of current from the “ ...
Page 11
... Purchaser or its customers and shall remain in Ember and its licensors. No source code rights are granted to Purchaser or its customers with respect to all Ember Application Software. Purchaser agrees not to copy, modify, alter, translate, decompile, disassemble, or reverse engineer the Ember Hardware (including without limitation any embedded software) or attempt to disable any security devices or codes incorporated in the Ember Hardware ...