EPSILON5-A1 Equinox Technologies, EPSILON5-A1 Datasheet - Page 30

• Manufacturer Part Number: EPSILON5-A1
• Description: ISP PORTABLE PROGRAMMER USB
• Manufacturer: Equinox Technologies
• Series: Epsilon5r
• Type: Portable ISPr

Specifications of EPSILON5-A1

• Contents: Programmer, Software, Cables and Documentation
• Ic Product Type: In-Circuit Programmer
• Features: 2Mbits Of On-Board Non-Volatile FLASH Memory For User Project Storage
• Interface Type: JTAG
• Mcu Supported Families: ATmega And AT91SAM7
• Mpu Supported Families: AVR
• Rohs Compliant: Yes
• External Depth: 31mm
• Height: 189mm
• Length: 80mm
• For Use With/related Products: ATMEL AT89S, AVR, AT91SAM7, NXP P89C51Rx2 P89C66x, Zensys, Serial EEPROM's
• Other names: 483-1000

7
8
9
10
11
12
13
EPSILON5 MKII Programmer - User Guide V1.10 – 10th July 2006
Select the required ISP Header and then plug
the ISP Cable into this Header.
Please refer to section 4.
Connect 3.0-5.0V to CON1 via supplied lead
(white stripe is +ve)
or
Fit J9 and connect ISP Cable to powered
Target System
Please refer to section 3 for further details.
Remove power from programmer
Re-fit lid to programmer
Re-fit the four screws in the back of the case
Ensure that the PC, programmer and Target
System power is switched OFF.
Connect the PC serial cable to the
programmer RS-232 port (J5) and connect
the other end of the cable to a spare PC
COM port.
See section 1.5.6 for Serial Cable
specifications.
Apply power to the programmer
!!! WARNING !!!
Vcc’ LED will illuminate.
The ISP Cable should fit through the slot in the
end panel.
Programmer circuitry powers up to 3.0V.
If the Jumper Link J9 is fitted then the ‘Target
All LED’s go out
•
operation of the programmer.
It should only be fitted when the
programmer firmware is being updated.
•
•
If you select the wrong ISP
Header then it is possible that
you may damage both the
programmer and Target System
when power is switched on.
Please ensure you are using the
correct header. If in doubt, please
refer to section 4 of this manual
and / or contact Equinox Support
for assistance.
19