EPSILON5-A1 Equinox Technologies, EPSILON5-A1 Datasheet - Page 81

• Manufacturer Part Number: EPSILON5-A1
• Description: ISP PORTABLE PROGRAMMER USB
• Manufacturer: Equinox Technologies
• Series: Epsilon5r
• Type: Portable ISPr

Specifications of EPSILON5-A1

• Contents: Programmer, Software, Cables and Documentation
• Ic Product Type: In-Circuit Programmer
• Features: 2Mbits Of On-Board Non-Volatile FLASH Memory For User Project Storage
• Interface Type: JTAG
• Mcu Supported Families: ATmega And AT91SAM7
• Mpu Supported Families: AVR
• Rohs Compliant: Yes
• External Depth: 31mm
• Height: 189mm
• Length: 80mm
• For Use With/related Products: ATMEL AT89S, AVR, AT91SAM7, NXP P89C51Rx2 P89C66x, Zensys, Serial EEPROM's
• Other names: 483-1000

6
7
8
9
10
Key
O - Output from programmer to Target Device
I - Input to programmer from Target Device
P - Passive eg. GROUND and power rails
N/C - Not connected
70
PROG_GND
PROG_SCK1
PROG_GND
PROG_MISO
PROG_GND
P
O
P
I
P
GROUND
SCK
GROUND
MISO
(except for
ATmega103/128/64
– connect to TXD
pin instead)
GROUND
EPSILON5 MKII Programmer - User Guide V1.10 – 10th July 2006
according to the device type and settings
in the ‘Pre-program State Machine’ tab in
the Eqtools project.
Ground Connection
Common ground connection between the
programmer and Target System.
SPI Serial Clock Output
This is the SPI clock output signal.
Ground Connection
Common ground connection between the
programmer and Target System.
Master In Slave Out
This is the SPI data input pin to the
programmer. This pin should be
connected to the MISO pin on the Target
Microcontroller.
Ground Connection
Common ground connection between
PROGRAMMER and Target System.