EPSILON5-A1 Equinox Technologies, EPSILON5-A1 Datasheet - Page 63

• Manufacturer Part Number: EPSILON5-A1
• Description: ISP PORTABLE PROGRAMMER USB
• Manufacturer: Equinox Technologies
• Series: Epsilon5r
• Type: Portable ISPr

Specifications of EPSILON5-A1

• Contents: Programmer, Software, Cables and Documentation
• Ic Product Type: In-Circuit Programmer
• Features: 2Mbits Of On-Board Non-Volatile FLASH Memory For User Project Storage
• Interface Type: JTAG
• Mcu Supported Families: ATmega And AT91SAM7
• Mpu Supported Families: AVR
• Rohs Compliant: Yes
• External Depth: 31mm
• Height: 189mm
• Length: 80mm
• For Use With/related Products: ATMEL AT89S, AVR, AT91SAM7, NXP P89C51Rx2 P89C66x, Zensys, Serial EEPROM's
• Other names: 483-1000

7a. Programming operation has FAILED !
7b. To clear the ERROR CONDITION:
7c. To re-program the same Target System
7d. To program a new Target System after a
8a. Programming operation has PASSED.
9.
10. Disconnect ISP Cable from Target System
11. Repeat procedure from step 1 with new
52
once.
Press
Go to step 5.
FAILURE:
Go to step 9.
Go to step 9.
Switch Target Power Supply OFF
Target System.
key once
EPSILON5 MKII Programmer - User Guide V1.10 – 10th July 2006
outputs connected to the
Target System
mode
outputs to connect to Target
system
released (target code may
start to execute)
down
No change
FAIL LED flashes
Programmer tri-states all
FAIL LED goes out
Programmer is in ‘Standby’
Programmer tri-states all
Target System RESET is
Target System powers
All LED’s go OFF
Programmer powers OFF
<PASS> LED flashes