HS3048BTCM01H Renesas Electronics America, HS3048BTCM01H Datasheet - Page 147

• Manufacturer Part Number: HS3048BTCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS3048BTCM01H

• Contents: E10T-USB, Cable and CD-ROM
• For Use With/related Products: H8/3048B
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

When MD2 and MD0 to MD1 pins are 1:
When MD0 to MD1 pins are 0:
User system
connector
User system
connector
4.
5.
6.
7.
MD0 to MD2 pins are used by the emulator at power-on reset. Connect MD0 to
MD2 pins as shown in figure 6.6.
Connect Vss and Vcc with the Vss and Vcc of the MCU, respectively.
Connect nothing with N.C.
The amount of voltage permitted to input to Vcc must be within the guaranteed
range of the microcomputer. The H8/3048F-ONE has 5.5- to 4.5-V and 3.0- to
3.6-V input voltages. Use the correct input voltage depending on the
microcomputer.
Pins 5,7,and 9
Pins 5,and 7
Figure 6.6 Example of Circuits for Operating Mode Setting Pins
Vcc
10 k
MD0 to MD2
MD0 to MD1
H8/3048F-ONE
H8/3048F-ONE
121