HS3048BTCM01H Renesas Electronics America, HS3048BTCM01H Datasheet - Page 37

• Manufacturer Part Number: HS3048BTCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS3048BTCM01H

• Contents: E10T-USB, Cable and CD-ROM
• For Use With/related Products: H8/3048B
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.3
Insert the card emulator into the PCMCIA TYPE II slot or the PCI slot of the host computer
(figures 2.2 and 2.3).
Note: Be sure to install the HDI before the card emulator is inserted.
Use the procedure, described in section 2.4, to connect the emulator to the user system with the
user system interface cable, or to disconnect them when moving the emulator or the user system.
Note: When installing the PCI card emulator, note the following:
1. Turn off the host computer.
2. Insert the emulator into the PCI slot in parallel.
3. Screw in the emulator after confirming the connector and cable positions.
Figure 2.2 Inserting the PCMCIA Card Emulator into the Host Computer
Connecting the Host Computer with the Card Emulator
Figure 2.3 Inserting the PCI Card Emulator into the Host Computer
Host computer
Host computer
Insert into the PCMCIA TYPE II slot
Insert into the PCI slot
PCI card emulator
PCMCIA card emulator
11