HS3048BTCM01H Renesas Electronics America, HS3048BTCM01H Datasheet - Page 38

• Manufacturer Part Number: HS3048BTCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS3048BTCM01H

• Contents: E10T-USB, Cable and CD-ROM
• For Use With/related Products: H8/3048B
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.4
(1) The connector must be installed to the user system. Table 2.1 shows the recommended
Table 2.1 Recommended Connector
Type Number
2514-6002
Note: When the connector is used, do not install any components within 3 mm of the
(2) The pin arrangement of the connector is shown in section 6.2, Pin Arrangement of the
(3) Figure 2.4 shows how to connect the user system interface cable to the user system. Connect
12
connector for the emulator.
Connector.
the ground line of the cable to the user system ground. The end of the ground line has a hole
having a diameter of 3 mm, and therefore, when the ground line is screwed to the user system,
the screw diameter must be 3 mm.
connector.
Figure 2.4 Connecting the User System Interface Cable to the User System
Connecting the Card Emulator with the User System
GND line
User system GND
connection
User system interface cable
Manufacturer
3M Limited
Pin 2
Pin 1
Specifications
20-pin straight type
User system
Connector
Tab