HS3048BTCM01H Renesas Electronics America, HS3048BTCM01H Datasheet - Page 150

• Manufacturer Part Number: HS3048BTCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS3048BTCM01H

• Contents: E10T-USB, Cable and CD-ROM
• For Use With/related Products: H8/3048B
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

6. Memory Access during Emulation
7. The emulator communicates with the H8/3048F-ONE by using the P95/SCK1, P93/RxD1,
8. The power consumed by the MCU can reach several mA. This is because the user power
9. The emulator uses a two-word stack pointer for values stored on a user program break.
6.4
Notes: 1. Do not use an MCU that has been used for debugging.
6.4.1
Table 6.3 shows drivers which can be selected in the [E10T Driver Details] dialog box.
Table 6.3 Type Name and Driver
Type Name
HS3048BTCM01H
HS3048BTCI01H
124
If the memory contents are referenced or modified during emulation, realtime emulation
cannot be performed because the user program is temporarily halted.
P91/TxD1, RES, FWE, and M2 to M0 pins. These pins cannot be used, except for RES and
M2 to M0 pins.
supply drives one HD74LV125A to make the communication signal level match the user-
system power-supply voltage. The power consumed rises little during user program execution
since the emulator does not perform communication; it rises more during a break.
Therefore, the stack area must accept two-word addresses.
2.
3.
Emulator Driver Selection
The H8/3048F-ONE E10T Emulator Functions
If the flash memory is rewritten many times, and the emulator is left for a few days,
data may be lost due to retention problems.
If the flash memory is rewritten many times, the data will not be erased. If an error
message is displayed, exchange the MCU for a new one.
Driver
E10T PC Card Driver 2
E10T PCI Card Driver 2