M3062PT3-CPE Renesas Electronics America, M3062PT3-CPE Datasheet - Page 92

• Manufacturer Part Number: M3062PT3-CPE
• Description: DEV COMPACT EMULATOR M16C/26A,28
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M3062PT3-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/62P
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M3062PT3-CPE User’s Manual
REJ10J1007-0400 Rev.4.00 July 29, 2009
Note on the Input Thresholds for the Pins P1_5/D13/INT3, P1_6/D14/INT4 and P1_7/D15/INT5
Note on Input Level for KI0# to KI3#:
Note on Debugging M16C/30P Group MCUs:
Note on Final Evaluation:
With this product, regarding pins P1_5/D13/INT3, P1_6/D14/INT4 and P1_7/D15/INT5, a device which port or
data bus inputs to and a device which INT interrupt inputs to are different as follows:
Therefore, the port input level can be read as “H” immediately after an INT interrupt (falling), and the port input
level can be read as “H” immediately before an INT interrupt (rising).
With this product, the KI0# to KI3# are TTL input level using the port emulation FPGA although these are the
CMOS Schmidt input level with the actual MCU. Therefore, the wrong interrupt may occur near the threshold
of the TTL level (2.0V to 0.8V) when the input signal is slow changing.
When debugging the M16C/30P Group MCUs, be sure to deselect the box of the internal reserved area
expansion bit (PM13), then start the emulator debugger.
The M16C/62P Groups MCUs are used as an evaluation MCU for this product. An initial value of the internal
reserved area expansion bit (PM13) for the M16C/62P Group is different from that of for the M16C/30P Group.
When developing the program for the M16C/30P Group, be sure to set the initial value of the internal reserved
area expansion bit (PM13) to “0” in the program.
Be sure to evaluate your system with an evaluation MCU. Before starting mask production, evaluate your
system and make final confirmation with a CS (Commercial Sample) version MCU.
Device which port or data bus inputs to: Port emulation FPGA (input level: TTL)
Device which INT interrupt inputs to: Evaluation MCU for emulating peripheral functions (input level:
CMOS Schmidt)
(1) An initial value of the internal reserved area expansion bit (PM13) for the M16C/62P Group: 1
(2) An initial value of the internal reserved area expansion bit (PM13) for the M16C/30P Group: 0
IMPORTANT
4. Hardware Specifications
Page 90 of 108