M3062PT3-CPE-4 Renesas Electronics America, M3062PT3-CPE-4 Datasheet - Page 102

• Manufacturer Part Number: M3062PT3-CPE-4
• Description: DEV COMPACT EMULATOR M16C/26A,28
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M3062PT3-CPE-4

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/62P
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M3062PT3-CPE User’s Manual
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
Figure 5.1 Flowchart to remedy the troubles
REJ10J1007-0400 Rev.4.00 July 29, 2009
Starting up emulator debugger
Turning on emulator and user
Front panel LED of emulator
Emulator debugger startup
Output Window displayed
Connected message on
Mcu Setting dialog box
displayed and setting
Init dialog displayed
Init dialog setting
Check serial No.
in Init dialog box
completed
system
Normal
Normal
Normal
Normal
Normal
http://www.renesas.com/en/tools
Not normal
Not normal / Error message displayed
Not normal / Error message displayed
Not normal / Error message displayed
Not normal / Error message displayed
1. Check the operating environment etc. of the emulator
2. Reinstall the emulator debugger
Check that the USB interface cable is connected and the
USB driver is installed properly.
See "5.2 (2) MCU Setting dialog Box Does Not Appear at
Debugger Startup".
See "5.2 (3) Errors Occur at Emulator Debugger Startup".
Check connection of the power supply cable.
See "2.4 Connecting the Powe Supply for Emulator".
debugger.
5. Troubleshooting
Page 100 of 108