M3062PT3-CPE-4 Renesas Electronics America, M3062PT3-CPE-4 Datasheet - Page 103

• Manufacturer Part Number: M3062PT3-CPE-4
• Description: DEV COMPACT EMULATOR M16C/26A,28
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M3062PT3-CPE-4

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/62P
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M3062PT3-CPE User’s Manual
5.2 When the Emulator Debugger Does Not Start Up Properly
(1) When the LEDs of the M3062PT3-CPE Do Not Display Normally
Table 5.1 Errors LEDs show and their checkpoints
(2) MCU Setting Dialog Box Does Not Appear at Debugger Startup
Table 5.2 Checkpoints of errors at debugger startup
REJ10J1007-0400 Rev.4.00 July 29, 2009
LEDs do not light up.
Target Status POWER LED does
not light up.
Target Status CLOCK LED does
not light up.
Target Status RESET LED does
not go out.
Communication error occurred.
Data was not sent to the target.
Not compact emulator.
Error
Error
the user system
Not connected
Connection to
Connected
Connected
Connected
-
Check that an emulator other than the compact emulator (such as
Check that the USB cable is connected properly.
See "2.5 Connecting the Host Machine" (page 25).
PC4701, PC7501) is not selected.
Check that the power cable is connected.
See "2.4 Connecting the Power Supply for the Emulator" (page 24).
Check that power (VCC1, VCC2 and GND) is properly supplied to
the user system.
(1) Check that both the main and sub clocks of the emulator
(2) Check that the oscillator circuit board is properly installed in
When the clock is supplied from an external oscillator, check that
the oscillator circuit in the user system is oscillating properly.
Check that the reset pin of the user system is held high.
debugger are not set to "EXT".
See the CLK command of the emulator debugger.
the emulator and is oscillating.
See "2.9.1 Selecting Clock Supply" (page 44).
Checkpoint
Checkpoint
5. Troubleshooting
Page 101 of 108