R0E436640CPE00 Renesas Electronics America, R0E436640CPE00 Datasheet - Page 36

• Manufacturer Part Number: R0E436640CPE00
• Description: EMULATOR COMPACT H8/3664
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of R0E436640CPE00

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: H8/3664
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

R0E436640CPE00 User’s Manual
2.9 Changing Settings
2.9.1 MCU Power Supply Source Selection Jumper/MCU Power Supply Voltage Selection Jumper
These are the jumper switches to select power supply to the MCU and its power voltage. Set the jumpers according to the use
conditions before turning on power, referring to “2.6.1 MCU Power Supply Source Selection Jumper/MCU Power Supply
Voltage Selection Jumper” (page 25).
2.9.2 Setting the Jumpers on the R0E436640EPBM0 Board
Figure 2.14 shows the location of jumper switches on the R0E436640EPBM0 board and their factory-settings.
Figure 2.14 Jumper switches on the R0E436640EPBM0
Table 2.5 Setting jumper switches on the R0E436640EPBM0
REJ10J0918-0300 Rev.3.00 February 15, 2007
Note on Setting Jumper Switches:
Switch No.
JP1
Always shut OFF the emulator before changing the setting of the jumper switches, and connecting the cable.
Otherwise the internal circuit may cause a break.
POWER select
Switch name
jumper
POWER
POWER
(Factory-setting)
INT
INT
How to set
EXT
EXT
CAUTION
- Connects the Vcc pin of the evaluation MCU to the internal power
- Use this setting for ordinary debug
- Connects the Vcc pin of the evaluation chip to the user system.
- Use this setting for power-on emulation when you want to turn the
supply (same voltage as Vcc on the MCU) of the emulator.
target power supply on or off or change the power supply voltage.
POWER
INT
Description
EXT
Page 34 of 102
2. Setup