R0E436640CPE00 Renesas Electronics America, R0E436640CPE00 Datasheet - Page 98

• Manufacturer Part Number: R0E436640CPE00
• Description: EMULATOR COMPACT H8/3664
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of R0E436640CPE00

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: H8/3664
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

R0E436640CPE00 User’s Manual
5.2 When the Emulator Debugger Does Not Start Up Properly
5.2.1 When the LEDs of the Emulator Do Not Display Normally
Table 5.1 Errors LEDs show and their checkpoints
REJ10J0918-0300 Rev.3.00 February 15, 2007
LEDs do not light up.
Target Status POWER LED does
not light up.
Target Status CLOCK LED does
not light up.
Target Status RESET LED does
not go out.
Error
the user system
Not connected
Connection to
Connected
Connected
Connected
-
Check that the power cable is connected.
See "2.4 Connecting the Power Supply for the Emulator" (page 23).
Check that power (Vcc and GND) is properly supplied to the user
system.
(1) Check that both the main and sub clocks of the emulator
(2) Check that the oscillator circuit board is properly installed in
When the clock is supplied from an external oscillator, check that
the oscillator circuit in the user system is oscillating properly.
Check that the reset pin of the user system is held high.
debugger are not set to "EXT".
See the CLK command of the emulator debugger.
the emulator and is oscillating.
See "2.9.3 Selecting Clock Supply" (page 35).
Checkpoint
5. Troubleshooting
Page 96 of 102