CY3672 Cypress Semiconductor Corp, CY3672 Datasheet - Page 3

• Manufacturer Part Number: CY3672
• Description: KIT DEV FTG PROGRAMMING KIT
• Manufacturer: Cypress Semiconductor Corp
• Series: CyClocks™r
• Type: FTG (Frequency Timing Generator)r

Specifications of CY3672

• Contents: Programmer, Power Supply, Cable(s) and Software
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: CY2077, CY22050F, CY22150F, CY2239, CY22381F, CY27EE16, CY23FP12, CY26049, CY25701, CY25100F
• For Use With: CY3613 - PROGRAM ADAPTER CY25701FJXC
• Lead Free Status / Rohs Status: Not Compliant
• Other names: 428-1458

Document #: 38-07409 Rev. *F
Quick Start Guide
Go through the following steps to properly configure and use
the CY3672.
Note:
1.
2.
2. Registration process for the CyberClocks Online:
3. For more detailed information on all the functions of the software and programmer, please see the user manual.
a. If you are using a parallel port, make sure your parallel
b. If you are using a USB port, insert the drive files CD,
c. Use the programmer arrow buttons to set the
a. Install CyberClocks or register on-line for SSCG
a. Go to CyberClocks Online website
b. Fill out the registration form. You need to have a valid e-mail address consists of a work-related e-mail.
c. Make sure to check the “non-standard devices” box in the registration form
d. Enter your cypress contact person.
e. The approval process can take up to 48 hours.
f.
port setting is ECP or EPP in your PC Bios settings.
Connect the power supply and hook up the parallel port
to your computer and programmer.
connect the power supply, and connect the USB cable
to the programmer and PC. The PC will detect the new
hardware, follow the wizard and search for suitable
driver from the CD-ROM.
programmer LCD display to “TYPE”
products configuration software, CyberClocks Online, at
www.cyberclocksonline.com
Upon the approval, the user will receive an e-mail indicating that the request has been successfully processed.
Step 6
[2]
Figure 4. CY3672 Software, Device Selection Page
10.When you see a window with “Socket 1... Program OK.”
3. Use CyberClocks or CyberClocks online to generate a
4. Open up the CY3672 software: go to Start
5. Double click on the device that you wish to program under
6. Click on the “Start” button at the bottom of the popup
7. Browse to and select the JEDEC file which you created
8. Click “Yes” when the Upload Message screen pops up.
9. Once you see “Complete...” on the status bar at the bottom
b. Install the CY3672 software, which is available on
JEDEC file for the device you wish to program.
Menu->Programs->Cypress->CY3672 or the location
where the software was installed.
the CYPRESS->CyClocksRT menu on the left side of the
screen, see Figure 4.
window, see Figure 5.
earlier in step 4 and click on “Open”.
of the window click on the “Program IC” icon at the top right
of the window (see figure below).
pop up you have successfully programmed a device.
Cypress website at www.cypress.com, onto your
computer.
Step 10
CY3672
Page 3 of 6
[3]
[+] Feedback