ST92F150-EMU2 STMicroelectronics, ST92F150-EMU2 Datasheet - Page 33

• Manufacturer Part Number: ST92F150-EMU2
• Description: BOARD EMULATOR FOR ST9 SERIES
• Manufacturer: STMicroelectronics
• Series: ST9-EMU2r
• Type: Microcontrollerr

Specifications of ST92F150-EMU2

• Contents: ST9 Visual Debug IDE, ST9 HDS2V2 Mainboard, Probe, Sockets, Adapters, Power Supply,Cables & Documentation
• For Use With/related Products: ST9 MCUs
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 497-3101

ST92F150-EMU2 User Manual
APPENDIX A: EMC CONFORMITY AND SAFETY REQUIREMENTS
This emulator respects the EMC requirements of the European guideline 89/336/
EEC under the following conditions:
•
•
•
•
•
•
•
•
Any tester, equipment, or tool used at any production step or for any
manipulation of semi-conductor devices have its shield connected to ground.
All ferrites provided with the emulatorkit must be attached as described in the
hardware installation instructions of the relevant user manual(s).
Your emulator must be placed on a conductive table top, made of steel or clean
aluminum, grounded through a ground cable.
All manipulation of finished goods must be made at such a grounded
worktable.
The worktable must be free of all non-antistatic plastic objects.
It is recommended that you wear an antistatic wrist or ankle strap, connected to
the antistatic floor covering or to the grounded equipment.
If no antistatic wrist or ankle strap is worn, before each manipulation of the
powered-on emulator, you must touch the surface of the grounded worktable.
It is recommended that antistatic gloves or finger coats be worn.
It is recommended that nylon clothing be avoided while performing any
manipulation of parts.
Appendix A: EMC Conformity and Safety Requirements
33/55