ZGP32300100ZPR Zilog, ZGP32300100ZPR Datasheet - Page 12
![PROGRAMMING SYSTEM Z8 GP ZGP323](/photos/9/30/93023/zgp32300100zpr_sml.jpg)
ZGP32300100ZPR
Manufacturer Part Number
ZGP32300100ZPR
Description
PROGRAMMING SYSTEM Z8 GP ZGP323
Manufacturer
Zilog
Series
Z8 GP™r
Type
Ethernetr
Datasheet
1.ZGP32300100ZPR.pdf
(22 pages)
Specifications of ZGP32300100ZPR
Contents
Programmer, Power Supply, Cable(s) and Software
Positions/sockets
1
Description/function
Z8 GP ZGP323 Programming Sytem
For Use With/related Products
Z8 GP ZGP323
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
269-3390
UM017403-0707
Changing Z8 Programmer Settings to Match the PC
5. Enter an IP address of 192.168.1.21 and a subnet mask of
6. Click OK and restart the PC.
The PC is now ready to communicate with Z8 Programmer via the ZDS II
software. The default IP address of the Z8 Programmer unit is
192.168.1.50. If this address conflicts with another address on the LAN,
or if another address is more compatible, see
Settings to Match the
into a ZGP323 OTP Chip
Follow the steps below to change the Z8 Programmer settings:
1. Connect the serial port of the PC to the Z8 Programmer serial port.
2. Launch HyperTerminal on the PC by selecting Start ––> Programs
3. Enter the name for a new connection in the Connection Description
4. In the Connect To dialog, set the Connect Using drop-down menu to
5. If you select COM1, the COM1 Properties dialog appears. Enter the
Bits per second
Data bits
255.255.255.0. These values connect the PC on to the same network
as the Z8 Programmer unit, and do not conflict with the IP address of
Z8 Programmer.
––> Accessories ––> Communications ––> HyperTerminal. The
Connection Description dialog box appears.
dialog box, and click OK to open the Connect To dialog box.
match the COM port to which the Crimzon ICE is connected. Click
OK.
following port settings and click OK. HyperTerminal should auto-
matically attempt a connection. Otherwise, select Call ––> Connect.
PC. Otherwise, see
57600
8
on page 11.
Z8 GP™ ZGP323 Programming System
Using ZDS II to Burn a Hex File
Changing Z8 Programmer
User Manual
Introduction
9