ZGP32300100ZPR Zilog, ZGP32300100ZPR Datasheet - Page 15

• Manufacturer Part Number: ZGP32300100ZPR
• Description: PROGRAMMING SYSTEM Z8 GP ZGP323
• Manufacturer: Zilog
• Series: Z8 GP™r
• Type: Ethernetr

Specifications of ZGP32300100ZPR

• Contents: Programmer, Power Supply, Cable(s) and Software
• Positions/sockets: 1
• Description/function: Z8 GP ZGP323 Programming Sytem
• For Use With/related Products: Z8 GP ZGP323
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3390

UM017403-0707
6. Set the Output Files Directory: to a specific directory where the out-
7. In the Debugger tab, set the Driver: field to Simulator.
8. Click OK.
9. Click OK in the Project Settings window.
10. When prompted to rebuild affected files, click Yes to rebuild the
The Build Output window at the bottom of ZDS II provides status mes-
sages about the rebuild’s progress.
11. To debug the program using the simulator, open the Build menu and
Now that the program is complete, we’re going to create a hex file you
can download into a ZGP323 chip installed on the programing system’s
OTP programming module.
12. In ZDS II, open the Build menu and select Set Active Configura-
13. In the Select Configuration dialog, select Release and click OK.
14. Open the Build menu and select Rebuild All to rebuild the project.
15. Browse to:
c:\Program Files\ZDSII_Z8GP_<version>\sam-
ples\ZGP323_ledBlink\ledblink_c\src directory.
The hex file
Release configuration is available in the above directory.
put files will be stored. By default, ZDS II stores the files in the same
directory as the project files.
project. (You can also rebuild later by pressing F7.)
select Debug and then Reset to load the simulator with the program
code. The simulator is used to completely debug the program before
downloading on to the chip.
tion.
ledblink_c.hex
Z8 GP™ ZGP323 Programming System
, created when you rebuilt the project in
User Manual
Introduction
12