ZGP32300100ZPR Zilog, ZGP32300100ZPR Datasheet - Page 14

• Manufacturer Part Number: ZGP32300100ZPR
• Description: PROGRAMMING SYSTEM Z8 GP ZGP323
• Manufacturer: Zilog
• Series: Z8 GP™r
• Type: Ethernetr

Specifications of ZGP32300100ZPR

• Contents: Programmer, Power Supply, Cable(s) and Software
• Positions/sockets: 1
• Description/function: Z8 GP ZGP323 Programming Sytem
• For Use With/related Products: Z8 GP ZGP323
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3390

UM017403-0707
Using ZDS II to Burn a Hex File into a ZGP323 OTP Chip
Interface Commands, see
Interface Commands
8. When you have finished configuring the Z8 Programmer, type
9. Press Alt+F4 to exit HyperTerminal.
10. Cycle the power on the Z8 Programmer or type reboot at the
The hardware is now configured and ready for use.
Follow the steps below to open the sample project
build a hex file from the program, and burn that hex file into the supplied
ZGP323 28-CDIP chip via the OTP programming module.
The sample project
directory, located in:
c:\Program Files\ZiLOG\ZDSII_<product>_<version>
1. Start ZDS II for the Z8 GP ZGP323 programming system by selecting
c:\Program Files\ZDSII_Z8GP_<version>
\samples\ZGP323_ledBlink\ledblink_c\src\ledblink_c.pro
2. In ZDS II open the Build menu and select Set Active Configuration.
3. In the Select Configuration dialog, select Debug and click OK.
4. Select Project –> Settings.
5. In the General tab, set the CPU Family field to
\samples\<processor type>_<demo name>
\<demo name>_<language>\src
to exit the command shell.
prompt for the new settings to take effect.
Start ––>File––> Open Project to open
projectledblink_c.pro
CPU field type to
ledblink_c.pro
on page 16.
ZGP323XXX2832
Appendix A–Z8 GP ZGP323 Programmer
Z8 GP™ ZGP323 Programming System
, the sample project available at:
is included in the ZDS II sample
.
ledblink_c.pro
ZGP323
User Manual
and the
Introduction
eth1%
exit
,
11