HS7750KCI01H Renesas Electronics America, HS7750KCI01H Datasheet - Page 223

• Manufacturer Part Number: HS7750KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7750KCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. Notes on the [Trace] Window
(1) If an interrupt is generated at the program execution start or end, including a step
(2) If a TLB error occurs while acquired trace information is displayed, the following error
(3) When MMU settings are modified or when a user program is changed between GO
(4) If a completion-type exception occurs during exception branch acquisition, the next address
(5) When a user interrupt is enabled by the INTERRUPT command during the emulator
execution, the emulator address may be acquired. In such a case, the following message
will be displayed. Ignore this address because it is not a user program address.
message will be displayed.
After a TLB error, trace acquisition cannot be performed.
command completion and trace display, the displayed mnemonics or operand may not be
correct.
to the address in which an exception occurs is acquired.
command wait state or user program execution, an interrupt that is generated at the
program execution start or end, including a step execution, can be traced in realtime.
6. When a user interrupt is enabled by the INTERRUPT command during the
*** EML ***
emulator command wait state or user program execution, an interrupt that is
generated at the program execution start or end, including a step execution, can
be traced in realtime.
Figure 6.6 Message Box for Clearing a TLB Error
Rev. 2.0, 01/01, page 199 of 214