HS7751RKCM01H Renesas Electronics America, HS7751RKCM01H Datasheet - Page 183

• Manufacturer Part Number: HS7751RKCM01H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7751RKCM01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Table 5.8 BREAKCONDITION_SET Command Parameters
Parameter
<channel_number>
<address>
<addrcycle>
<maskdata>
<data>
Type
Numerical value
Numerical value
Keyword
Character string
Numerical value
Description
Hardware break condition channel number
Specifiable options change depending on the channel
number. For details, refer to section 6.5.2, Break
Condition Functions.
1: <addropt>, <dataopt>, <asidopt>, <r/wopt>, and
<accessopt> can be set.
2: <addropt>, <asidopt>, <r/wopt>, and <accessopt>
can be set.
3: <ldtlbopt> and <ioopt> can be set.
Virtual address as an address bus value
Address bus access conditions for program fetch
cycles
Set either of the following keywords:
pc: Breaks before the address set by the <address>
parameter is executed. When this keyword is set, only
the <addropt> and <asidopt> cannot be set as
conditions. In addition, when pc is set, the
<maskdata> parameter cannot be set.
pcafter: Breaks after the address set by the
<address> parameter is executed. When this keyword
is set, only the <addropt> and <asidopt> cannot be set
as conditions. When pcafter is not set, the address
bus during data access cycles and program fetch
cycles is targeted as the access condition.
x: X-Bus address bus access
y: Y-Bus address bus access
Mask specification for desired bits in the data
Set a radix (H' for hexadecimal or B' for binary) at the
top of a character string and set * in the bit to the
masked. Conditions are satisfied regardless of the
values of masked bits.
Data bus value
155