HS7751RKCM01H Renesas Electronics America, HS7751RKCM01H Datasheet - Page 41

• Manufacturer Part Number: HS7751RKCM01H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7751RKCM01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Notes:
Figure 2.4 Connecting the User System Interface Cable to the User System
1.
2.
3.
4.
5.
To connect the signals output from the Hitachi-UDI port connector, refer to
the device pin alignment.
To remove the user system interface cable from the user system, pull the tab
on the connector upward.
The range of frequencies that the Hitachi-UDI operates at is different
according to the devices used. For details, refer to section 6.5.4, Notes on
Using the JTAG Clock (TCK) and AUD Clock (AUDCK).
Connect the Hitachi-UDI signals from the Hitachi-UDI port connector directly
to the device.
When developing user systems, do not connect the TDI and TDO signals of the
device to the boundary scan loop, or separate them by using a switch (figure
2.5).
when the 14-pin Straight Type Connector is Used
13