HS7751RKCM01H Renesas Electronics America, HS7751RKCM01H Datasheet - Page 276

• Manufacturer Part Number: HS7751RKCM01H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7751RKCM01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

7.3.3
Description:
Sets or displays AUD window trace acquisition conditions.
Format:
wts [<option> [<startaddress> <endaddress>] [<cycle>]]
<option> = channel <channel>
<startaddress> = start <s_address>
<endaddress> = end <e_address>
<cycle> = cycle <cycle>
Table 7.9 WINDOWTRACE_SET Command Parameter
Parameter
<channel>
<s_address>
<e_address>
<cycle>
Notes: 1. When <s_address> or <e_address> setting is omitted, the current values are set to the
Examples:
To set the WINDOW_SET command so that trace acquisition is performed from channel A when
memory range H’100 to H’200 is read:
To display the current window trace acquisition condition:
The display format is as follows:
248
2. When all parameter settings are omitted, the current settings are displayed.
WINDOWTRACE_SET Command: WTS
wts channel A start H’100 end H’200 cycle R (RET)
wts (RET)
start address or end address.
Type
Keyword
Numerical value
Numerical value
Keyword
Description
Selects the channel for set or display.
A: Sets or displays this parameter for channel A.
B: Sets or displays this parameter for channel B.
Sets the start address.
Sets the end address.
Sets the read or write cycle.
R: Trace acquisition of the read cycle
W: Trace acquisition of the write cycle
RW: Trace acquisition of the read/write cycle