DV007004 Microchip Technology, DV007004 Datasheet - Page 118

• Manufacturer Part Number: DV007004
• Description: PROGRAMMER UNIVERSAL PM3
• Manufacturer: Microchip Technology
• Series: MPLAB&reg PM3r
• Type: Universalr

Specifications of DV007004

• Contents: MPLAB PM3 Programming Unit, Cables, Power Supply and IDE
• Positions/sockets: 1
• Ic Product Type: Programmer, Universal
• Supported Families: PICmicro, DsPIC30F
• Kit Contents: LCD, ICSP Support, 40-pin Socket, Digital/Multimedia Card Slot
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Microchip's PICmicro devices including dsPIC30F
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: PICmicro And DsPIC30F DSC Devices
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

DS51464C-page 112
®
B.5.2.4
The programmers are designed to run with the drivers shipped with the Windows
operating system. Third party drivers may or may not work. Check your SYSTEM.INI
file. Under [OPTIONS] you should have a line that reads:
COMM.DRV=COMM.DRV
If this line reads differently, you are using a third party driver.
B.5.2.5
On some systems, the programmer is unable to set up the communications port. It must
be set up manually.
On Windows 98/ME, select Settings>Control Panel from the Start menu. Select
System and click on the Device Manager tab. Expand the Ports selection and double
click on the port you are trying to use. Click the Port Settings tab, and select 57600
baud, 8 data bits, no parity, 1 stop bit and hardware flow control. Click Advanced.
Uncheck the “Use FIFO buffers” checkbox. Some systems have a problem with this.
Reboot the PC to implement the change.
On Windows NT, select Settings>Control Panel from the Start menu. Select System
and double click on Ports. Click on a COM port from the list and then click Settings. In
the Settings dialog, select 57600 baud, 8 data bits, no parity, 1 stop bit and hardware
flow control. Click Advanced and uncheck the “Use FIFO buffers” checkbox. Reboot
the PC to implement the change.
On Windows 2000/XP, click the System Icon. Click the Hardware tab, and click the
Device Manager button. If necessary, expand the Ports selection by clicking the '+'
sign next to it. Double click the I/O port to which the programmer is connected. This is
where you can set flow control to Hardware. To turn off FIFO, click the Port Settings
tab, and click the Advanced button. Uncheck the “Use FIFO buffers” checkbox, and
click OK. Reboot the PC to implement the change.
B.5.3
In order for the MPLAB PM3 Card options to be available on the MPLAB IDE Program-
mer menu, the MPLAB PM3 Card must be inserted in the MPLAB PM3 Programmer,
the programmer must be powered on and the programmer must be enabled through
MPLAB IDE. If the card is not supported, the MPLAB PM3 Card will not appear on the
Programmer menu. (See the Readme for MPLAB PM3 for a list of recommended
cards.)
THIRD PARTY COMMUNICATIONS DRIVERS
MANUALLY SETTING UP THE PORT
MPLAB PM3 Card Option Not Available on Programmer Menu
© 2006 Microchip Technology Inc.