05045C103MA79A AVX Corporation, 05045C103MA79A Datasheet - Page 45

• Manufacturer Part Number: 05045C103MA79A
• Description: CAP CER 10000PF 50V X7R 0504
• Manufacturer: AVX Corporation

Specifications of 05045C103MA79A

• Capacitance: 10000pF
• Voltage - Rated: 50V
• Tolerance: ±20%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESL
• Applications: General Purpose
• Package / Case: 0504 (1210 Metric)
• Size / Dimension: 0.050" L x 0.040" W (1.27mm x 1.02mm)
• Thickness: 1.02mm Max
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -

WAVE SOLDERING
Component Spacing
For wave soldering components, must be spaced sufficient-
ly far apart to avoid bridging or shadowing (inability of solder
to penetrate properly into small spaces). This is less impor-
tant for reflow soldering but sufficient space must be
allowed to enable rework should it be required.
Surface Mounting Guide
Appendix 1: MLC Capacitors
Dimensions in millimeters (inches)
D1
D2
D3
D4
1.5mm (0.06)
1mm (0.04)
1mm (0.04)
D5
Case Size
0603
0805
1206
1210
1808
1812
1825
2220
2225
3.10 (0.12)
4.00 (0.15)
5.00 (0.19)
5.00 (0.19)
6.60 (0.26)
6.60 (0.26)
6.60 (0.26)
7.60 (0.29)
7.60 (0.29)
D1
1.20 (0.05)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
Preheat & Soldering
The rate of preheat should not exceed 4° C/second to
prevent thermal shock. A better maximum figure is about 2°
C/second.
For capacitors size 1206 and below, with a maximum thick-
ness of 1.25mm, it is generally permissible to allow a tem-
perature differential from preheat to soldering of 150°C. In
all other cases this differential should not exceed 100°C.
For further specific application or process advice please
consult AVX.
Cleaning
Care should be taken to ensure that the capacitors are
thoroughly cleaned of flux residues especially the space
beneath the capacitor. Such residues may otherwise
become conductive and effectively offer a low resistance
bypass to the capacitor.
Ultrasonic cleaning is permissible, the recommended condi-
tions being 8 Watts/litre at 20-45 kHz, with a process cycle
of 2 minutes vapor rinse, 2 minutes immersion in the ultra-
sonic solvent bath and finally 2 minutes vapor rinse.
D2
0.70 (0.03)
1.00 (0.04)
2.00 (0.09)
2.00 (0.09)
3.60 (0.14)
3.60 (0.14)
3.60 (0.14)
4.60 (0.18)
4.60 (0.18)
D3
1.20 (0.05)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
1.50 (0.06)
D4
0.75 (0.03)
1.25 (0.05)
1.60 (0.06)
2.50 (0.10)
2.00 (0.08)
3.00 (0.12)
6.35 (0.25)
5.00 (0.20)
6.35 (0.25)
D5
43