PIC18LF24J11-I/SS Microchip Technology, PIC18LF24J11-I/SS Datasheet - Page 145

• Manufacturer Part Number: PIC18LF24J11-I/SS
• Description: IC PIC MCU FLASH 16K 2V 28-SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF24J11-I/SS

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 28-SSOP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 31 KHz
• Number Of Programmable I/os: 16
• Number Of Timers: 5
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DM183022, DM183033, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

9.7.3.1
The inputs of the PPS options are mapped on the basis
of the peripheral; that is, a control register associated
with a peripheral dictates the pin it will be mapped to.
The RPINRx registers are used to configure peripheral
input mapping (see Register 9-6 through Register 9-20).
Each register contains a 5-bit field, which is associated
TABLE 9-13:
© 2009 Microchip Technology Inc.
External Interrupt 1
External Interrupt 2
External Interrupt 3
Timer0 External Clock Input
Timer3 External Clock Input
Input Capture 1
Input Capture 2
Timer1 Gate Input
Timer3 Gate Input
EUSART2 Asynchronous Receive/Synchronous
Receive
EUSART2 Asynchronous Clock Input
SPI2 Data Input
SPI2 Clock Input
SPI2 Slave Select Input
PWM Fault Input
Note 1:
Unless otherwise noted, all inputs use the Schmitt Trigger input buffers.
Input Mapping
SELECTABLE INPUT SOURCES (MAPS INPUT TO FUNCTION)
Input Name
Function Name
RX2/DT2
SCK2IN
T0CKI
T3CKI
SS2IN
CCP1
CCP2
PIC18F46J11 FAMILY
FLT0
INT1
INT2
INT3
SDI2
T1G
T3G
CK2
with one of the pin selectable peripherals. Programming
a given peripheral’s bit field with an appropriate 5-bit
value maps the RPn pin with that value to that
peripheral. For any given device, the valid range of
values for any of the bit fields corresponds to the
maximum number of peripheral pin selections supported
by the device.
RPINR12
RPINR13
RPINR16
RPINR17
RPINR21
RPINR22
RPINR23
RPINR24
Register
RPINR1
RPINR2
RPINR3
RPINR4
RPINR6
RPINR7
RPINR8
(1)
RX2DT2R<4:0>
Configuration
DS39932C-page 145
INTR1R<4:0>
INTR2R<4:0>
INTR3R<4:0>
OCFAR<4:0>
SCK2R<4:0>
T0CKR<4:0>
T3CKR<4:0>
SDI2R<4:0>
T1GR<4:0>
T3GR<4:0>
CK2R<4:0>
SS2R<4:0>
IC1R<4:0>
IC2R<4:0>
Bits