PIC12CE673-04/P Microchip Technology, PIC12CE673-04/P Datasheet - Page 229

• Manufacturer Part Number: PIC12CE673-04/P
• Description: IC MCU OTP 1KX14 A/D&EE 8DIP
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12CE673-04/P

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Type: OTP
• Eeprom Size: 16 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Controller Family/series: PIC12
• No. Of I/o's: 6
• Eeprom Memory Size: 16Byte
• Ram Memory Size: 128Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Processor Series: PIC12C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 8
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: ISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMINGAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Connectivity: -
• Lead Free Status / Rohs Status: Details

15.3.3
1997 Microchip Technology Inc.
SPI Master SSPM3:SSPM0 = 00xxb
Typical Connection
MSb
PROCESSOR 1
Serial Input Buffer
Figure 15-2
(Processor 1) initiates the data transfer by sending the SCK signal. Data is shifted out of both
shift registers on their programmed clock edge, and latched on the edge of the clock specified by
the SMP bit. Both processors should be programmed to same Clock Polarity (CKP), then both
controllers would send and receive data at the same time. Whether the data is meaningful (or
dummy data) depends on the application software. This leads to three scenarios for data trans-
mission:
• Master sends data — Slave sends dummy data
• Master sends data — Slave sends data
• Master sends dummy data — Slave sends data
Figure 15-2:
Shift Register
(SSPBUF)
(SSPSR)
shows a typical connection between two microcontrollers. The master controller
LSb
SPI Master/Slave Connection
SDO
SCK
SDI
Serial Clock
SDO
SCK
SDI
Section 15. SSP
SPI Slave SSPM3:SSPM0 = 010xb
MSb
Serial Input Buffer
Shift Register
PROCESSOR 2
(SSPBUF)
(SSPSR)
DS31015A-page 15-9
LSb
15