DSPIC30F5011-20I/PT Microchip Technology, DSPIC30F5011-20I/PT Datasheet - Page 3

• Manufacturer Part Number: DSPIC30F5011-20I/PT
• Description: IC DSPIC MCU/DSP 66K 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F5011-20I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 66KB (22K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Package: 64TQFP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 52
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 16-chx12-bit
• Number Of Timers: 5
• For Use With: XLT64PT5 - SOCKET TRAN ICE 64MQFP/TQFPAC164319 - MODULE SKT MPLAB PM3 64TQFPAC30F008 - MODULE SKT FOR DSPIC30F 64TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DSPIC30F5011-20I/PTG; DSPIC30F501120/PT; DSPIC30F501120IPT; DSPIC30F501120IPT

High-Performance Modified RISC CPU:
• Modified Harvard architecture
• C compiler optimized instruction set architecture
• Flexible addressing modes
• 83 base instructions
• 24-bit wide instructions, 16-bit wide data path
• 66 Kbytes on-chip Flash program space
• 4 Kbytes of on-chip data RAM
• 1 Kbyte of nonvolatile data EEPROM
• 16 x 16-bit working register array
• Up to 30 MIPS operation:
• Up to 41 interrupt sources:
DSP Features:
• Dual data fetch
• Modulo and Bit-Reversed modes
• Two 40-bit wide accumulators with optional
• 17-bit x 17-bit single cycle hardware fractional/
• All DSP instructions are single cycle
• Single cycle ±16 shift
© 2011 Microchip Technology Inc.
Note:
- DC to 40 MHz external clock input
- 4 MHz-10 MHz oscillator input with
- Eight user selectable priority levels
- Five external interrupt sources
- Four processor traps
saturation logic
integer multiplier
- Multiply-Accumulate (MAC) operation
PLL active (4x, 8x, 16x)
This data sheet summarizes features of
this group of dsPIC30F devices and is not
intended to be a complete reference
source. For more information on the CPU,
peripherals, register descriptions and
general device functionality, refer to the
“dsPIC30F Family Reference Manual”
(DS70046). For more information on the
device instruction set and programming,
refer to the “16-bit MCU and DSC Pro-
grammer’s
(DS70157).
High-Performance, Digital Signal Controllers
Reference
Manual”
dsPIC30F5011/5013
Peripheral Features:
• High-current sink/source I/O pins: 25 mA/25 mA
• Five 16-bit timers/counters; optionally pair up
• 16-bit Capture input functions
• 16-bit Compare/PWM output functions
• Data Converter Interface (DCI) supports common
• 3-wire SPI modules (supports four Frame modes)
• I
• Two addressable UART modules with FIFO
• Two CAN bus modules compliant with CAN 2.0B
Analog Features:
• 12-bit Analog-to-Digital Converter (ADC) with:
• Programmable Low-Voltage Detection (PLVD)
• Programmable Brown-out Detection and Reset
Special Microcontroller Features:
• Enhanced Flash program memory:
• Data EEPROM memory:
• Self-reprogrammable under software control
• Power-on Reset (POR), Power-up Timer (PWRT)
• Flexible Watchdog Timer (WDT) with on-chip
• Fail-Safe Clock Monitor operation:
• Programmable code protection
• In-Circuit Serial Programming™ (ICSP™)
• Selectable Power Management modes:
16-bit timers into 32-bit timer modules
audio codec protocols, including I
and 7-bit/10-bit addressing
buffers
standard
- 200 ksps conversion rate
- Up to 16 input channels
- Conversion available during Sleep and Idle
generation
- 10,000 erase/write cycle (min.) for
- 100,000 erase/write cycle (min.) for
and Oscillator Start-up Timer (OST)
low- power RC oscillator for reliable operation
- Detects clock failure and switches to on-chip
programming capability
- Sleep, Idle and Alternate Clock modes
2
C™ module supports Multi-Master/Slave mode
industrial temperature range, 100K (typical)
industrial temperature range, 1M (typical)
low-power RC oscillator
2
S and AC’97
DS70116J-page 3