Z8F012AQB020EG Zilog, Z8F012AQB020EG Datasheet - Page 159

• Manufacturer Part Number: Z8F012AQB020EG
• Description: IC ENCORE XP MCU FLASH 1K 8-QFN
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F012AQB020EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: IrDA, UART/USART
• Peripherals: Brown-out Detect/Reset, LED, LVD, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 6
• Program Memory Size: 1KB (1K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 16 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 8-VQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-3759

PS022825-0908
Caution:
Flash Controller Bypass
Flash Controller Behavior in DEBUG Mode
value
Controller executes the Mass Erase operation, the eZ8 CPU idles but the system clock and
on-chip peripherals continue to operate. Using the On-Chip Debugger, poll the Flash Sta-
tus register to determine when the Mass Erase operation is complete. When the Mass
Erase is complete, the Flash Controller returns to its locked state.
The Flash Controller can be bypassed and the control signals for the Flash memory
brought out to the GPIO pins. Bypassing the Flash Controller allows faster Row Program-
ming algorithms by controlling the Flash programming signals directly.
Row programming is recommended for gang programming applications and large volume
customers who do not require in-circuit initial programming of the Flash memory. Page
Erase operations are also supported when the Flash Controller is bypassed.
For more information on bypassing the Flash Controller, refer to Third-Party Flash Pro-
gramming Support for Z8 Encore!
load at www.zilog.com.
The following changes in behavior of the Flash Controller occur when the Flash Control-
ler is accessed using the On-Chip Debugger:
For security reasons, the Flash controller allows only a single page to be opened for
write/erase. When writing multiple Flash pages, the flash controller must go through the
unlock sequence again to select another page.
•
•
•
•
•
•
•
63H
The Flash Write Protect option bit is ignored.
The Flash Sector Protect register is ignored for programming and erase
operations.
Programming operations are not limited to the page selected in the Page Select
register.
Bits in the Flash Sector Protect register can be written to one or zero.
The second write of the Page Select register to unlock the Flash Controller is not
necessary.
The Page Select register can be written when the Flash Controller is unlocked.
The Mass Erase command is enabled through the Flash Control register.
to the Flash Control register initiates the Mass Erase operation. While the Flash
®
MCU Application Note (AN0117) available for down-
Z8 Encore! XP
Product Specification
®
F082A Series
Flash Memory
148