C8051F829-GS Silicon Laboratories Inc, C8051F829-GS Datasheet - Page 221

• Manufacturer Part Number: C8051F829-GS
• Description: IC MCU 8BIT 8KB FLASH 16SOIC
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F82xr

Specifications of C8051F829-GS

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 16-SOIC (3.9mm Width)
• Processor Series: C8051F8x
• Core: 8051
• Data Bus Width: 16 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F800DK
• Minimum Operating Temperature: - 55 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 336-1809-5

28.2.3. Comparator 0 Capture Mode
The capture mode in Timer 2 allows Comparator 0 rising edges to be captured with the timer clocking from
the system clock or the system clock divided by 12. Timer 2 capture mode is enabled by setting TF2CEN
to 1 and T2SPLIT to 0.
When capture mode is enabled, a capture event will be generated on every Comparator 0 rising edge.
When the capture event occurs, the contents of Timer 2 (TMR2H:TMR2L) are loaded into the Timer 2
reload registers (TMR2RLH:TMR2RLL) and the TF2H flag is set (triggering an interrupt if Timer 2 inter-
rupts are enabled). By recording the difference between two successive timer capture values, the
Comparator 0 period can be determined with respect to the Timer 2 clock. The Timer 2 clock should be
much faster than the capture clock to achieve an accurate reading.
This mode allows software to determine the time between consecutive Comparator 0 rising edges, which
can be used for detecting changes in the capacitance of a capacitive switch, or measuring the frequency of
a low-level analog signal.
External Clock / 8
Comparator 0
SYSCLK / 12
SYSCLK
Output
T2XCLK
Figure 28.6. Timer 2 Capture Mode Block Diagram
0
1
M
H
T
3
M
T
3
L
CKCON
M
H
T
2
M
T
2
L
0
1
M
T
1
M
T
0
S
C
A
1
TF2CEN
S
C
A
0
TR2
Capture
Rev. 1.0
TCLK
TMR2RLL TMR2RLH
TMR2L
TMR2H
C8051F80x-83x
TF2CEN
T2SPLIT
TF2LEN
T2XCLK
TF2H
TF2L
TR2
Interrupt
221