PIC16LF1826-I/MV Microchip Technology, PIC16LF1826-I/MV Datasheet - Page 339

• Manufacturer Part Number: PIC16LF1826-I/MV
• Description: IC MCU 8BIT FLASH 28UQFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF1826-I/MV

• Core Size: 8-Bit
• Program Memory Size: 3.5KB (2K x 14)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-UFQFN Exposed Pad
• Controller Family/series: PIC16LF
• No. Of I/o's: 16
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 256Byte
• Cpu Speed: 32MHz
• No. Of Timers: 3
• Processor Series: PIC16LF
• Core: PIC
• Data Ram Size: 256 B
• Maximum Clock Frequency: 32 KHz
• Number Of Programmable I/os: 16
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• On-chip Dac: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MOVWI
Syntax:
Operands:
Operation:
Status Affected:
Description:
 2010 Microchip Technology Inc.
Mode
Preincrement
Predecrement
Postincrement
Postdecrement
Move W to INDFn
[ label ] MOVWI ++FSRn
[ label ] MOVWI --FSRn
[ label ] MOVWI FSRn++
[ label ] MOVWI FSRn--
[ label ] MOVWI k[FSRn]
[ label ] MOVWI FSRn
n  [0,1]
mm  [00, 01, 10, 11].
-32  k  31
If not present, k = 0.
W  INDFn
Effective address is determined by
• FSR + 1 (preincrement)
• FSR - 1 (predecrement)
• FSR + k (relative offset)
After the Move, the FSR value will be
either:
• FSR + 1 (all increments)
• FSR - 1 (all decrements)
Unchanged
This instruction is used to move data
between W and one of the indirect
registers (INDFn). Before/after this
move, the pointer (FSRn) is updated by
pre/post incrementing/decrementing it.
Note: The INDFn registers are not
physical registers. Any instruction that
accesses an INDFn register actually
accesses the register at the address
specified by the FSRn.
FSRn is limited to the range 0000h -
FFFFh. Incrementing/decrementing it
beyond these bounds will cause it to wrap
around.
The increment/decrement operation on
FSRn WILL NOT affect any Status bits.
None
Syntax
++FSRn
--FSRn
FSRn++
FSRn--
mm
00
01
10
11
Preliminary
NOP
Syntax:
Operands:
Operation:
Status Affected:
Description:
Words:
Cycles:
Example:
OPTION
Syntax:
Operands:
Operation:
Status Affected:
Description:
RESET
Syntax:
Operands:
Operation:
Status Affected:
Description:
PIC16F/LF1826/27
Load OPTION_REG Register
with W
[ label ] OPTION
None
(W)  OPTION_REG
None
Move data from W register to
OPTION_REG register.
Software Reset
[ label ] RESET
None
Execute a device Reset. Resets the
nRI flag of the PCON register.
None
This instruction provides a way to
execute a hardware Reset by soft-
ware.
No Operation
[ label ]
None
No operation
None
No operation.
1
1
NOP
NOP
DS41391C-page 339