PIC12C672T-04I/SM Microchip Technology, PIC12C672T-04I/SM Datasheet - Page 324

• Manufacturer Part Number: PIC12C672T-04I/SM
• Description: IC MCU OTP 2KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C672T-04I/SM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164312 - MODULE SKT FOR PM3 16SOIC309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

PICmicro MID-RANGE MCU FAMILY
17.4.15
17.4.16
17.4.17
DS31017A-page 17-48
BRG overflow,
Release SCL,
If SCL = 1 Load BRG with
SSPADD<6:0>, and start count
to measure high time interval
SCL
SDA
Clock Arbitration
Sleep Operation
Effect of a Reset
Clock arbitration occurs when the master, during any receive, transmit, or Repeated Start/stop
condition de-asserts the SCL pin (SCL allowed to float high). When the SCL pin is allowed to float
high, the baud rate generator (BRG) is suspended from counting until the SCL pin is actually
sampled high. When the SCL pin is sampled high, the baud rate generator is reloaded with the
contents of SSPADD<6:0> and begins counting. This ensures that the SCL high time will always
be at least one BRG rollover count in the event that the clock is held low by an external device
(Figure
Figure 17-33: Clock Arbitration Timing in Master Transmit Mode
While in sleep mode, the I
or complete byte transfer occurs wake the processor from sleep (if the MSSP interrupt is
enabled).
A reset disables the MSSP module and terminates the current transfer.
T
17-33).
BRG
BRG overflow occurs,
Release SCL, Slave device holds SCL low.
T
BRG
2
C module can receive addresses or data, and when an address match
Preliminary
SCL line sampled once every machine cycle (T
Hold off BRG until SCL is sampled high.
T
SCL = 1 BRG starts counting
clock high interval.
BRG
1997 Microchip Technology Inc.
osc
4).